ETP Expansion ER Tapper (Tapping Chuck)
- 20221004153627
- Model No:
N/A
- Product Description:
Tension: 6.5mm, compression: 5mm.
Suitable for traditional CNC machines without rigid tapping program.
Using with rigid tap collets increases the clamping force, prevents taps from falling off and improves the machining efficiency.
Face Mill Arbor (FMA Type)
- 20221004153610
- Model No:
N/A
- Product Description:
Inch size.
Tolerance of d1 the connection part with cutter: h6, which is good for less chatter and longer cutter life.
Standard screw attached is w/o coolant hole.
To use with face mill cutters with coolant holes, the standard screw has to be chan...
SFM 45 Degrees Face Milling Cutter
- 20221004153557
- Model No:
N/A
- Product Description:
Three types to choose from: with coolant holes, without coolant holes and shrink mill type.
For coolant through cutters, use FMC face mill arbor or FMA/FMB face mill arbor with washer screws changed into the ones with coolant flutes.
Shrink mill ha...
MBH Finish Boring Head
- 20221004153539
- Model No:
N/A
- Product Description:
One division for adjustment is 10μm on diameter.
High precision lead screw and nut have been heat treated and hardened with high durability.
Built-in coolant nozzle is optimal for metal chip removal.
Insert seat with two-face support is free from ...
BT/SAR Angle Head Holder
- 20181016112615
- Model No:
N/A
- Product Description:
?The spindle chuck is designed to be #30 taper type, which can be used to match multiple and suitable adapters according to different processing requirements.
?Gear ratio 1:1, the spindle doesn’t need to turn counterclockwise.
?The fixed block is a...
CAT/SCK Boring Head Shank
- 20181016112527
- Model No:
N/A
- Product Description:
?The pre-balance can reach G6.3 5,000 rpm, without an inspection report.
?The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
ER Sealed Collet
- 20171024102534
- Model No:
SYIC - 08300
- Product Description:
Steel: SUJ2.
?HRC 46°.
?Taper 8°.
?The design is to take use of the difference of flutes and O-rings to achieve center coolant.
?Useful for coolant cutting tools.
?Water pressure up to 21 kgf/cm2.
?No flexibility (No flexible chucking range. I...
ER Coolant Collet (FID TYPE)
- 20171024102514
- Model No:
N/A
- Product Description:
Feature:
?The design of coolant groove is good for cooling and metal chips removal, extending tool life.
SLF Slim-Fit Shrink Fit Collet Chuck
- 20171024102340
- Model No:
SYIC - 86300
- Product Description:
?High rigidity.
?Best runout (T.I.R): 5μ.
?Slim design.
?Easy operation.
CAT/SBL SLIM-FIT COLLET CHUCK
- 20171024102240
- Model No:
SYIC - 23700
- Product Description:
?Runout is within 5μ(4D length).
?SKS Collet taper: 4°, increasing holding power, concentricity and rigidity.
?Every tool holder reaches revolution of G2.5 25,000 rpm, with an inspection report.
?The balancing grade and revolution can be done acco...
BT/PNER COLLET CHUCK
- 20171024102154
- Model No:
SYIC - 16300
- Product Description:
?The pre-balance can reach G6.3 10,000 rpm, without an inspection report.
?The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
HSK/SFC Shrink Fit Chuck For Type A
- 20160922154704
- Model No:
SYIC - 39082
- Product Description:
1. High rigidity.
2. T.I.R.: within 5 μ.
3. Slim design.
4. Easy operation.
5. Every tool holder reaches the standard of G2.5 25,000 rpm, with an inspection report.
6. The balancing grade and revolution can be done according to customer's re...
BT/SFC Shrink Fit Chuck
- 20160922154640
- Model No:
SYIC - 19002
- Product Description:
1. High rigidity.
2. T.I.R.: within 5 μ.
3. Slim design.
4. Easy operation.
5. Every tool holder reaches the standard of G2.5 25,000 rpm, with an inspection report.
6. The balancing grade and revolution can be done according to customer's re...
BT Pull Studs
- 20160922154459
- Model No:
SYIC - 17801
- Product Description:
Product Name: BT Pull Studs
CAT Pull Studs
- 20160922154400
- Model No:
SYIC - 21003
- Product Description:
Product Name: CAT Pull Studs
TG 100 Milling Chuck Set
- 20160922154224
- Model No:
SYIC - 84072
- Product Description:
1. Please inform if the collet chuck measurements are in inch or metric system and 7 pcs/set or 15 pcs/set.
2. Please inform the draw bar's size when making an order.
3. Concetric end mill extending 25mm with concentricity at 0.01mm.
4. T thre...
SHIN-YAIN Milling Chuck Set
- 20160922154147
- Model No:
SYIC-83800
- Product Description:
* Complete sets use SYOZ collet.
* Packed with plastic box, Wooden box package is different price.
* Please indicate the collet chuck measurements in inch or metric system and 7pcs/set or 15pcs/set.
* Please specify the draw bar's size when ma...
SBT/CIAP Indexable End Mill Cutter
- 20160922154017
- Model No:
25.244C.16.065
- Product Description:
Product Name: SBT/CIAP Indexable End Mill Cutter
SQP Square Shoulder Milling Cutter
- 20160922153950
- Model No:
154.688.22.050
- Product Description:
1. The material of SQP is superior Alloy Tool Steel, which improves rigidity and anti-vibration ability.
2. The material is treated with fine processing after hardening, which improves cutter’s stability during the cutting process.
3. Used for end ...
IFMC Square Shoulder Milling Cutter
- 20160922153920
- Model No:
N/A
- Product Description:
Product Name: IFMC Square Shoulder Milling Cutter
Turning Tool Holder
- 20160922152426
- Model No:
150.B3.30.20.40
- Product Description:
1. Radial-right handed.
2. Short tool holder.
3. Turning insert downwards.
4. With coolant hole.
Turning Tool Holder (VDI Static Tool Holder)
- 20160922152357
- Model No:
N/A
- Product Description:
Product Name: Turning Tool Holder (VDI Static Tool Holder)
BT/HBL SLIM-FIT COLLET CHUCK
- 20160922152134
- Model No:
18858H
- Product Description:
1. Every tool holder reaches the revolution of G2.5 25,000 rpm, with an inspection report.
2. The balancing grade and revolution can be done according to customer request but the additional charge is needed.
HSK/HBL SLIM-FIT COLLET CHUCK FOR TYPE A
- 20160922152111
- Model No:
35456H
- Product Description:
1. Every tool holder reaches the revolution of G2.5 25,000 rpm, with an inspection report.
2. The balancing grade and revolution can be done according to customer request but the additional charge is needed.
Collet Chuck Holder For EOC Collets
- 20160922152044
- Model No:
150.E3.30.25
- Product Description:
Product Name: Collet Chuck Holder For EOC Collets
Collet Chuck Holder For ER Collets
- 20160922152020
- Model No:
150.E4.30.25
- Product Description:
1. It can match with ER Collets (DIN-15488 standard) and can clamp all kinds of straight shank tools.
2. Rigidity can be raised by using ER Power Good Clamping Nut.
3. Matching with Wind Resistance Nut can raise clamping power, stability and precis...
PSL/ER COLLET CHUCK
- 20160922151957
- Model No:
161.122.16.040
- Product Description:
Product Name: PSL/ER COLLET CHUCK
HSK/SKS COLLET CHUCK FOR TYPE A
- 20160922151922
- Model No:
SYIC - 35506
- Product Description:
1. Runout is within 5μ (4D length).
2. SKS Collet taper: 4° , increasing holding power, concentricity and rigidity.
3. Every tool holder reaches revolution of G2.5 25,000 rpm, with an inspection report.
4. The balancing grade and revolution can be...
CAT/ER COOLET CHUCK M TYPE
- 20160922151846
- Model No:
SYIC - 22352
- Product Description:
1. The pre-balance can reach G6.3 10,000 rpm, without an inspection report.
2. The balancing grade and revolution can be done according to customer's request but the additional charge is needed.
PNER COLLET
- 20160922151747
- Model No:
SYIC-04216-PN
- Product Description:
MODEL NO. SYIC-04216-PN
BT/PNER COLLET CHUCK
- 20160922151705
- Model No:
N/A
- Product Description:
Product Name: BT/PNER COLLET CHUCK
