TANSHING ACCURATE INDUSTRIAL CO., LTD.
Taiwan 4th & 5th Axis Rotary Table, Pneumatic & Hydraulic Indexing Table Manufacturer
Detail Information
Description :
1.Worktable diameter 255, 320, 400, 500mm
2.Motor is mounted at right
3.Exclusive dual lead worm drive.
4.Wholly circular hydraulic locking system
5.Big hole rotary table
Specification :
BRNC-255A
| Specifications / Model | Unit | BRNC-255A | |
|---|---|---|---|
| Worktable Diameter | Ømm | Ø255 | |
| Table Height | Horizontal | mm | 200 |
| Center Height | Vertical | mm | 160 |
| Overall Height | mm | 305 | |
| Center Bore Diameter | Ømm | Ø100H7 | |
| Through-Hole Diameter | Ømm | Ø95 | |
| Width Of T-Slot | mm | 12H7 | |
| Width Of Guide Block | mm | 18H7 | |
| Minimum Input Increment | deg. | 0.001° | |
| Indexing Accuracy | sec. | 20" | |
| Repeatability | sec. | 4" | |
| Servo Motor (Model As Required) | FANUC | aiF 8 | |
| MELDAS | HF-154S | ||
| Speed Reduction Ratio | 1/120 | ||
| Table Rotation Speed | r.p.m | 25 | |
| Allowable Inertia Force | kg-cm-sec2 | 12.3 | |
| Allowable Turntable Torque | kg-m | 48 | |
| Drive Pressure / Method | kg/cm2 | 35 (Hyd.) | |
| Clamping Torque | kg-m | 50 | |
| Allowable Load Capacity | Vertical | kg | 200 |
| Horizontal | 640 | ||
| Tail-Stock Used | 400 | ||
| Allowable Workpiece Diameter | Ømm | Ø255 | |
| Net Weight (Motor Excluded) | kg | 100 | |
- Note:
- 1."N" means shortened motor cover, please contact us for shortening drawing if necessity.
2."A" means high-load design (Equipped with radial and axial bearing).
BRNC-320
| Specifications / Model | Unit | BRNC-320/320N | |
|---|---|---|---|
| Worktable Diameter | Ømm | Ø320 | |
| Table Height | Horizontal | mm | 222 |
| Center Height | Vertical | mm | 210 |
| Overall Height | mm | 385 | |
| Center Bore Diameter | Ømm | Ø100H7 | |
| Through-Hole Diameter | Ømm | Ø100 | |
| Width Of T-Slot | mm | 14H7 | |
| Width Of Guide Block | mm | 18H7 | |
| Minimum Input Increment | deg. | 0.001° | |
| Indexing Accuracy | sec. | 20" | |
| Repeatability | sec. | 4" | |
| Servo Motor (Model As Required) | FANUC | aiF 12 | |
| MELDAS | HF-204S | ||
| Speed Reduction Ratio | 1/180 | ||
| Table Rotation Speed | r.p.m | 16.6 | |
| Allowable Inertia Force | kg-cm-sec2 | 38.5 | |
| Allowable Turntable Torque | kg-m | 78 | |
| Drive Pressure / Method | kg/cm2 | 35 (Hyd.) | |
| Clamping Torque | kg-m | 85 | |
| Allowable Load Capacity | Vertical | kg | 150 |
| Horizontal | 350 | ||
| Tail-Stock Used | 350 | ||
| Allowable Workpiece Diameter | Ømm | Ø320 | |
| Net Weight (Motor Excluded) | kg | 170 | |
- Note:
- 1."N" means shortened motor cover, please contact us for shortening drawing if necessity.
2."A" means high-load design (Equipped with radial and axial bearing).
BRNC-40A
| Specifications / Model | Unit | BRNC-40A | |
|---|---|---|---|
| Worktable Diameter | Ømm | Ø400 | |
| Table Height | Horizontal | mm | 250 |
| Center Height | Vertical | mm | 255 |
| Overall Height | mm | 465 | |
| Center Bore Diameter | Ømm | Ø180H7 | |
| Through-Hole Diameter | Ømm | Ø180 | |
| Width Of T-Slot | mm | 14H7 | |
| Width Of Guide Block | mm | 18H7 | |
| Minimum Input Increment | deg. | 0.001° | |
| Indexing Accuracy | sec. | 20" | |
| Repeatability | sec. | 4" | |
| Servo Motor (Model As Required) | FANUC | aiF 12 | |
| MELDAS | HF-204S | ||
| Speed Reduction Ratio | 1/180 | ||
| Table Rotation Speed | r.p.m | 16.6 | |
| Allowable Inertia Force | kg-cm-sec2 | 99.8 | |
| Allowable Turntable Torque | kg-m | 170 | |
| Drive Pressure / Method | kg/cm2 | 35 (Hyd.) | |
| Clamping Torque | kg-m | 180 | |
| Allowable Load Capacity | Vertical | kg | 240 |
| Horizontal | 800 | ||
| Tail-Stock Used | 480 | ||
| Allowable Workpiece Diameter | Ømm | Ø400 | |
| Net Weight (Motor Excluded) | kg | 270 | |
- Note:
- 1."N" means shortened motor cover, please contact us for shortening drawing if necessity.
2."A" means high-load design (Equipped with radial and axial bearing).
BRNC-500
| Specifications / Model | Unit | BRNC-500 | |
|---|---|---|---|
| Worktable Diameter | Ømm | Ø500 | |
| Table Height | Horizontal | mm | 300 |
| Center Height | Vertical | mm | 310 |
| Overall Height | mm | 560 | |
| Center Bore Diameter | Ømm | Ø220H7 | |
| Through-Hole Diameter | Ømm | Ø220 | |
| Width Of T-Slot | mm | 18H7 | |
| Width Of Guide Block | mm | 18H7 | |
| Minimum Input Increment | deg. | 0.001° | |
| Indexing Accuracy | sec. | 20" | |
| Repeatability | sec. | 4" | |
| Servo Motor (Model As Required) | FANUC | aiF 12 | |
| MELDAS | HF-204S | ||
| Speed Reduction Ratio | 1/180 | ||
| Table Rotation Speed | r.p.m | 16.6 | |
| Allowable Inertia Force | kg-cm-sec2 | 187.6 | |
| Allowable Turntable Torque | kg-m | 250 | |
| Drive Pressure / Method | kg/cm2 | 35 (Hyd.) | |
| Clamping Torque | kg-m | 250 | |
| Allowable Load Capacity | Vertical | kg | 400 |
| Horizontal | 960 | ||
| Tail-Stock Used | 800 | ||
| Allowable Workpiece Diameter | Ømm | Ø500 | |
| Net Weight (Motor Excluded) | kg | 400 | |
- Note:
- 1."N" means shortened motor cover, please contact us for shortening drawing if necessity.
2."A" means high-load design (Equipped with radial and axial bearing).
TANSHING ACCURATE INDUSTRIAL CO., LTD.
- Taiwan
- No 1-1, Lane 165, Sec, 1, Tan-shing Rd., Taichung City 42743, Taiwan
- 886-4-25384978
- 886-4-25384980