TANSHING ACCURATE INDUSTRIAL CO., LTD.
Taiwan 4th & 5th Axis Rotary Table, Pneumatic & Hydraulic Indexing Table Manufacturer
Detail Information
Description :
Absolute value motor are recommended for tilting axis.
Specification :
TRNC-125H
| Specifications / Model | Unit | TRNC-125H | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø125 | ||
| Table Height | Horizontal | mm | 236 | |
| Center Height | 90° | mm | 150 | |
| Overall Height | 90° | mm | 260 | |
| Center Bore Diameter | Ømm | Ø25H7 | ||
| Through-Hole Diameter | Ømm | Ø13 | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 14H7 | ||
| Tilting Angle | deg. | -40°~+120° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 40" | 60" | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF 2 | αiF 2 | |
| MELDAS | HF-75T | HF-75T | ||
| Speed Reduction Ratio | 1/90 | 1/180 | ||
| Table Rotation Speed | r.p.m | 55.5 | 27.7 | |
| Allowable Inertia Force | kg-cm-sec2 | 2 | ||
| Allowable Turntable Torque | kg-m | 8 | ||
| Drive Pressure / Method | kg/cm2 | 5 / Pneumatic | 35 / Hydraulic | |
| Clamping Torque | kg-m | 8.5 | 17 | |
| Allowable Load Capacity | 0° | kg | 50 | |
| 0°~90° | 35 | |||
| Allowable Workpiece Diameter | Ømm | Ø125 | ||
| Net Weight (Motor Excluded) | kg | 106 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)
TRNC-170C
| Specifications / Model | Unit | TRNC-170C | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø170 | ||
| Table Height | Horizontal | mm | 280 | |
| Center Height | 90° | mm | 190 | |
| Overall Height | 90° | mm | 380 | |
| Center Bore Diameter | Ømm | Ø35H7 | ||
| Through-Hole Diameter | Ømm | Ø35 | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Tilting Angle | deg. | -35°~+120° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 20" | 60" | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 4 | |
| MELDAS | HF-104T | HF-104T | ||
| Speed Reduction Ratio | 1/90 | 1/120 | ||
| Table Rotation Speed | r.p.m | 44.4 | 33.3 | |
| Allowable Inertia Force | kg-cm-sec2 | 4.9 | ||
| Allowable Turntable Torque | kg-m | 15 | ||
| Drive Pressure / Method | kg/cm2 | 5 / Pneumatic | 5 / Hydraulic | |
| Clamping Torque | kg-m | 8.5 | 8.5 | |
| Allowable Load Capacity | 0° | kg | 50 | |
| 0°~90° | 35 | |||
| Allowable Workpiece Diameter | Ømm | Ø170 | ||
| Net Weight (Motor Excluded) | kg | 126 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)
TRNC-210C
| Specifications / Model | Unit | TRNC-210C | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø210 | ||
| Table Height | Horizontal | mm | 280 | |
| Center Height | 90° | mm | 190 | |
| Overall Height | 90° | mm | 380 | |
| Center Bore Diameter | Ømm | Ø45H7 | ||
| Through-Hole Diameter | Ømm | Ø45 | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Tilting Angle | deg. | -35°~+110° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 20" | 60" | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 4 | |
| MELDAS | HF-104T | HF-104T | ||
| Speed Reduction Ratio | 1/90 | 1/120 | ||
| Table Rotation Speed | r.p.m | 44.4 | 33.3 | |
| Allowable Inertia Force | kg-cm-sec2 | 4.9 | ||
| Allowable Turntable Torque | kg-m | 15 | ||
| Drive Pressure / Method | kg/cm2 | 5 / Pneumatic | 5 / Pneumatic | |
| Clamping Torque | kg-m | 8.5 | 8.5 | |
| Allowable Load Capacity | 0° | kg | 50 | |
| 0°~90° | 35 | |||
| Allowable Workpiece Diameter | Ømm | Ø210 | ||
| Net Weight (Motor Excluded) | kg | 131 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)
TRNC-255A
| Specifications / Model | Unit | TRNC-255A | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø255 | ||
| Table Height | Horizontal | mm | 400 | |
| Center Height | 90° | mm | 400 | |
| Overall Height | 90° | mm | 550 | |
| Center Bore Diameter | Ømm | Ø50H7 | ||
| Through-Hole Diameter | Ømm | - | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Tilting Angle | deg. | -30°~+120° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | ||
| Indexing Accuracy | sec. | 15" (Gear) ★20" (Belt) | ★20" (Belt) | |
| Repeatability | sec. | 4" | － | |
| Servo Motor (Model As Required) | FANUC | αiF4/ αiF 8 (recommend) | αiF 8 | |
| MELDAS | HF-104T | HF-154T | ||
| Speed Reduction Ratio | 1/120 | 1/120 | ||
| Table Rotation Speed | r.p.m | 25 | 25 | |
| Allowable Inertia Force | kg-cm-sec2 | 6.4 | ||
| Allowable Turntable Torque | kg-m | 16 | ||
| Drive Pressure / Method | kg/cm2 | 5 / Pneumatic | 5 / Pneumatic | |
| Clamping Torque | kg-m | ◎50 | ◎50 | |
| Allowable Load Capacity | 0° | kg | 100 | |
| 0°~90° | 50 | |||
| Allowable Workpiece Diameter | Ømm | Ø255 | ||
| Net Weight (Motor Excluded) | kg | 599 | ||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)
TRNC-255B
| Specifications / Model | Unit | TRNC-255B | |||
|---|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø255 | |||
| Table Height | Horizontal | mm | 330 | ||
| Center Height | 90° | mm | 235 | ||
| Overall Height | 90° | mm | 388 | ||
| Center Bore Diameter | Ømm | Ø100H7 | |||
| Through-Hole Diameter | Ømm | Ø100 | |||
| Width Of T-Slot | mm | 12H7 | |||
| Width Of Guide Block | mm | 18H7 | |||
| Tilting Angle | deg. | -40°~+120° | |||
| Axis | Rotation | Inclination | |||
| Minimum Input Increment | deg. | 0.001° | |||
| Indexing Accuracy | sec. | 15"★15" | 60"★20" | ||
| Repeatability | sec. | 4" | － | ||
| Servo Motor (Model As Required) | FANUC | αiF 4 | αiF 8 | αiF 8 | |
| MELDAS | HF-104T | HF-154T | |||
| Speed Reduction Ratio | 1/90 | 1/180 | |||
| Table Rotation Speed | r.p.m | 44.4 | 33.3 | 16.6 | |
| Allowable Inertia Force | kg-cm-sec2 | 11 | |||
| Allowable Turntable Torque | kg-m | 48 | |||
| Drive Pressure / Method | kg/cm2 | 35 / Pneumatic | 35 / Pneumatic | ||
| Clamping Torque | kg-m | 46 | 46 | ||
| Allowable Load Capacity | 0° | kg | 140 | ||
| 0°~90° | 80 | ||||
| Allowable Workpiece Diameter | Ømm | Ø255 | |||
| Net Weight (Motor Excluded) | kg | 400 | |||
- Note：
- 1. "★" Means with encoder of HEIDENHAIN ECN-2XX series.
2. "◎" Means With built-in Pneumatic/Hydraulic converter.
3. The tilting shaft on model TRNC-170A and TRNC-210A provides a choice of electric side mounting, as TRNC-125H.(L type)
TANSHING ACCURATE INDUSTRIAL CO., LTD.
- Taiwan
- No 1-1, Lane 165, Sec, 1, Tan-shing Rd., Taichung City 42743, Taiwan
- 886-4-25384978
- 886-4-25384980