Powerful cutterhead motor. Variable feed speed is driven by a DC motor. Speed range 0-90 ft/min. Digital position controller for convenient thickness setting / automatic positioning. Ruggedly constructed throughout - machine weight 2,360 lbs. Spiral cutterhead provides high chip removal rate, superior surface finish and low noise level. Precision cutterhead ball bearings. Heavy duty cast iron table is heat treated and precision ground. Powered table elevation for fast and convenient thickness setting is standard. Additional emergency stop switch provided at back side of the machine. Two ?1-1/2" jack screws provide solid support of table. Corrugated sectional infeed roller has independent movement for running strip stock of varying thicknesses. Improves safety. Anti-kickback...

1. FEED ROLLER PRESSURE REGULATION VALVE The pressure for infeed and outfeed roller can be agjusted separately for extremely smooth feeding performance. 2. REDUCE DISTANCE ROLLER It guarantce transport of short workpiece. The workpiece can be hold firmly against the fence to avoid the workpiece jumping that may effect the quality of product. This device is movable for convenient toll replacement of vertical spindle. 3. FEEDING SYSTEM This machine use warm gear reducer and universal joint shaft to feed the workpiece through smoothly. 4. VARIABLE SPEED ADJUST DEVICE Feed speed via inverter provide positive feed. This machine can adjust the feeding speed according to the actual need. The speed range is 6-36M/min. (Mouldtec type is 6-30M/min) 5. CONTROL PANEL All of the machine...

The four table rollers provide superior feeding regard;ess of the type of Wood being processed. Y- standard start-delta motor starter Quick belt tension adjustment for the bottom cutterhead. Chain belt of fillings delivery is automatically motor-driven. Automatic oil-filling system.which provides the convenience of the lubrication of conveying tracks. The Table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds. The dovetailed slideways on the table elevation ensures stability and rigidity. Both the top and bottom cutter-heads can be fitted with spiral cutter-heads.(Cutter-headsavailable on request.) Corregated, seetional infeed rollers. Adopting pneumatic disassembling tools,the time for replacing planning-knife can...

1. Centralized Lubrication Points- Greasing to all critical parts is conveniently made by the centralized arrangement of lubrication points. 2. Feed System- The bottom infeed roller works in conjunction with a limit switch to stop the machine if workpiece is too thick. Powered Infeed Roller- The smooth initial feeding of the stock is achieved by means of the independently powered infeed rollers. 3. High Precision Spindle- All spindles are precision constructed and specially heat treated to provide maximum cutting stability and permanent accuracy. They are water and dust-proof. Standard spindle speed is 6000 RPM. 4. Straight Knife And Automatic Profile Jointer (Opt.)- The remote-controlled straight knife and automatic profile jointers provide accurate operation with high repeatability. They...

1. The machine frame is manufactured of heavy duty steel plate to minimize vibration and deflection. 2. All parts of the machine can be easily obtained for maintenance and service, under the sanding aggregate and the pressure rollers. 3. It's the stable feed table. Around the table, it runs an endless anti-slip conveyor belt. 4. The drive is powered by a strong feed motor and a varible speed control from 4 to 16 meters per minute. 5. The conveyor belt is adjustable with an auto tracking unit. 6. The sanding belt runs around the contact drum and the tension(or idle) roller. 7. The tracking of the sanding belt is achieved by an electric-eye. 8. Suitable for heavy process on laminating board and solid Wood.

1. The four table rollers provide superior feeding performance. 2. Standard Y-delta motor starting. 3. Quick belt change for bottom cutterhead. 4. Automatic lubrication for feeding chain. 5. Automatic lubricator provides convenient lubrication to caterpillar chain sideways. 6. An air wrench is applied for removing or installing knives and saves knife change time. 7. The table surface is hard chrome plated and precision ground for extremely smooth feeding and maximum wear resistance. 8. The dovetailed sideways on the table elevation assure outstanding rigidity and stability.

Features: The four table rollers provide superior feeding regard;ess of the type of Wood being processed. Y- standard start-delta motor starter Quick belt tension adjustment for the bottom cutterhead. Chain belt of fillings delivery is automatically motor-driven. Automatic oil-filling system.which provides the convenience of the lubrication of conveying tracks. The Table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds. The dovetailed slideways on the table elevation ensures stability and rigidity. Both the top and bottom cutter-heads can be fitted with spiral cutter-heads.(Cutter-headsavailable on request.) Corregated, seetional infeed rollers. Adopting pneumatic disassembling tools,the time for replacing planning-knife...