1. Main motor std/max (HP): 15/10. 2. Feed motor (HP): 1. 3. Hoist motor (HP): 1 / 2. 4. Feed speed (m/min/fpm): 4-16. 5. Net weight (kgs): 1000. 6. Gross weight (kgs): 1200.

1. Main motor std/max (HP): 25, 20. 2. Feed motor (HP): 3. 3. Hoist motor (HP): 1 / 2. 4. Feed speed (m/min/fpm): 4-16. 5. Net weight (kgs): 3500. 6. Gross weight (kgs): 4000.

1. Main motor std/max (HP): 15, 10/20, 15. 2. Feed motor (HP): 2. 3. Hoist motor (HP): 1 / 2. 4. Feed speed (m/min/fpm): 4-16. 5. Net weight (kgs): 1600. 6. Gross weight (kgs): 1800.

1. The machine frame is manufactured of heavy duty steel plate to minimize vibration and deflection. 2. All parts of the machine can be easily obtained for maintenance and service, under the sanding aggregate and the pressure rollers. 3. It's the stable feed table. Around the table, it runs an endless anti-slip conveyor Belt. 4. The drive is powered by a strong feed motor and a varible speed control from 4 to 16 meters per minute. 5. The conveyor Belt is adjustable with an auto tracking unit. 6. The sanding Belt runs around the contact drum and the tension(or idle) roller. 7. The tracking of the sanding Belt is achieved by an electric-eye. 8. Suitable for heavy process on laminating board and solid wood.

1. Light weight and compact size. 2. Adjustable sanding guide. 3. Rear exhaust with tube muffler, quiet and sanding surface will not be spoiled by oil. 4. For wooden, plastic, glass, metal products...etc. 5. Table, chair, bed, cell phone housing ... etc. 6. Available from rough sanding to finishing. 7. Finishing of edge and removing scratch.

1. Abrasive Belt speed (60hz): 560m/min. 2. Conveyor Belt speed: 3.5 fpm. 3. Abrasive Belt drive motor: 2hp, single phase.

Belt sander is disigned to used in sanding some area which only allow very narrow space for the extension sanding bar to reach and complete the sanding mission.

1. The machine is massive constructed throughout for continuous heavy sanding. 2. Rugged construction: The main frame is fabricated of heavy duty steel plate and ribbed to minimize vibration and deflection. 3. Convenient controls: All operating controllers are centralized in a convenient control panel. Large, clearly identified and color coded push buttons simplify set up and start up. 4. Load meter: Maintains constant check during operation to indicate percentage of full load on motor. Conveniently mounted for immediate readout. 5. Emergency stop button: Large mushroom push button on control panel provides immediate stop control of all operating systems. 6. Main motor drive: Heavy duty rugged support of sanding head drive motor. Horsepower of motor directly related to size and performance...

1. The accessories can be applied such as emery cloth, woolen felt, scratch pad, buff wheel. The main operation is for sanding, grinding and polish. 2. The item is suitable for following operation: (1) For wooden products: table, chair, sideboard, bed, cheat of drawers etc. (2) For plastic products: clear finish of round and curved surface, deburring and removing scratch of plastic products. (3) For glass products: finishing of edge and removing scratch etc. (4) For metal products: deburring, removing scratch, sanding, polishing for all kinds of steel, iron, non-ferrous metal, hairline finish of stainless steel, etc.

1. Main motor std/max (HP): 15, 10/20, 15. 2. Feed motor (HP): 3. 3. Hoist motor (HP): 1 / 2. 4. Feed speed (m/min/fpm): 4-16. 5. Net weight (kgs): 1800. 6. Gross weight (kgs): 2000.