TANSHING ACCURATE INDUSTRIAL CO., LTD.
Taiwan 4th & 5th Axis Rotary Table, Pneumatic & Hydraulic Indexing Table Manufacturer
Detail Information
Description :
1.Direct-drive motor offers high speed running-up to 7 times faster than other ordinary models.
2.Reduction gear not required. No temperature displacement, Employs a high torque motor for high transmission efficiency. Allows for adopting hear exchanger.
3.Encoder equipped for high indexing accuracy.
4.Wholly circular hydraulic locking for high clamp torque.
Specification :
TDRT-125A
| Specifications / Model | Unit | TDRT-125A | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø125 | ||
| Table Height | Horizontal | mm | 375 | |
| Center Height | 90° | mm | 200 | |
| Overall Height | 90° | mm | 369 | |
| Center Bore Diameter | Ømm | Ø25H7 | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 14H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø125 | ||
| Tilting Angle | deg. | -100°~+100° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | 0.001° | |
| Indexing Accuracy | sec. | ※ | ※ | |
| Repeatability | sec. | ※ | ※ | |
| Direct-Drive Torque Motor | ETEL | TMB 0140-070 | TMB 0210-070 | |
| Peak / Continuous Torque | Nm | 89.1 / 45.4 | 309 / 167 | |
| FANUC | DiS 60/400 | DiS 150/300 | ||
| Peak / Continuous Torque | Nm | 130 / 65 | 380 / 170 | |
| Speed Reduction Ratio | 1/1 | 1/1 | ||
| Allowable Max. Rotation Speed | r.p.m | 352 | 185 | |
| Encoders Type | HEIDENHAIN | ECN-225(±10") or RCN226(±5") | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | ||
| Clamping Torque | kg.m/N.m | 33/323 | 85/833 | |
| Allowable Load Capacity | 0° | kg | 125 (With Tail-Stock) | |
| 0°~90° | kg | 50 (With Tail-Stock) | ||
| Net Weight | kg | 180 | ||
- Note:
- 1.※Positioning accuracy according to encoder type.
2. There are high-speed for option; please contact us for more details if necessity.
TDRT-255
| Specifications / Model | Unit | TDRT-255 | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø255 | ||
| Table Height | Horizontal | mm | 285 | |
| Center Height | 90° | mm | 220 | |
| Overall Height | 90° | mm | 439 | |
| Center Bore Diameter | Ømm | Ø50H7 | ||
| Width Of T-Slot | mm | 12H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø255 | ||
| Tilting Angle | deg. | -100°~+100° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | 0.001° | |
| Indexing Accuracy | sec. | ※ | ※ | |
| Repeatability | sec. | ※ | ※ | |
| Direct-Drive Torque Motor | ETEL | TMB 0210-050 | TMB 0291-070 | |
| Peak / Continuous Torque | Nm | 218 / 118 | 582 / 315 | |
| FANUC | DiS 150/300 | DiS 250/250 | ||
| Peak / Continuous Torque | Nm | 380 / 170 | 600 / 225 | |
| Speed Reduction Ratio | 1/1 | 1/1 | ||
| Allowable Max. Rotation Speed | r.p.m | 220 | 135 | |
| Encoders Type | HEIDENHAIN | ECN-225(±10") or RCN226(±5") | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | ||
| Clamping Torque | kg.m/N.m | 85/833 | 180/1764 | |
| Allowable Load Capacity | 0° | kg | 125 (With Tail-Stock) | |
| 0°~90° | kg | 80 (With Tail-Stock) | ||
| Net Weight | kg | 350 | ||
- Note:
- 1.※Positioning accuracy according to encoder type.
2. There are high-speed for option; please contact us for more details if necessity.
TDRT-320
| Specifications / Model | Unit | TDRT-320 | ||
|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø320 | ||
| Table Height | Horizontal | mm | 380 | |
| Center Height | 90° | mm | 300 | |
| Overall Height | 90° | mm | 593 | |
| Center Bore Diameter | Ømm | Ø50H7 | ||
| Width Of T-Slot | mm | 14H7 | ||
| Width Of Guide Block | mm | 18H7 | ||
| Allowable Workpiece Diameter | Ømm | Ø320 | ||
| Tilting Angle | deg. | -100°~+100° | ||
| Axis | Rotation | Inclination | ||
| Minimum Input Increment | deg. | 0.001° | 0.001° | |
| Indexing Accuracy | sec. | ※ | ※ | |
| Repeatability | sec. | ※ | ※ | |
| Direct-Drive Torque Motor | ETEL | TMB 0210-070 | TMB 0291-100 | |
| Peak / Continuous Torque | Nm | 309 / 167 | 831 / 456 | |
| FANUC | DiS 150/300 | DiS 500/250 | ||
| Peak / Continuous Torque | Nm | 380 / 170 | 1200 / 520 | |
| Speed Reduction Ratio | 1/1 | 1/1 | ||
| Allowable Max. Rotation Speed | r.p.m | 180 | 130 | |
| Encoders Type | HEIDENHAIN | ECN-225(±10") or RCN226(±5") | ||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | ||
| Clamping Torque | kg.m/N.m | 85/833 | 80/1764 | |
| Allowable Load Capacity | 0° | kg | 300 (With Tail-Stock) | |
| 0°~90° | kg | 125 (With Tail-Stock) | ||
| Net Weight | kg | 400 | ||
- Note:
- 1.※Positioning accuracy according to encoder type.
2. There are high-speed for option; please contact us for more details if necessity.
TDRT-500
| Specifications / Model | Unit | TDRT-500 | |||
| Worktable Diameter | Ømm | Ø500(650) | |||
|---|---|---|---|---|---|
| Table Height | Horizontal | mm | － | ||
| Center Height | 90° | mm | － | ||
| Overall Height | 90° | mm | － | ||
| Center Bore Diameter | Ømm | Ø50H7 | |||
| Width Of T-Slot | mm | 18H7 | |||
| Width Of Guide Block | mm | － | |||
| Allowable Workpiece Diameter | Ømm | Ø650 | |||
| Tilting Angle | deg. | -100°~+100° | |||
| Axis | Rotation | Inclination | |||
| Minimum Input Increment | deg. | 0.001° | 0.001° | 0.001° | |
| Indexing Accuracy | sec. | ※ | ※ | ※ | |
| Repeatability | sec. | ※ | ※ | ※ | |
| Direct-Drive Torque Motor | ETEL | TMB 0360-070 | TMB 0450-100 | Optional HEIDENHAIN QSY-190D | |
| Peak / Continuous Torque | Nm | 990 / 554 | 2330 / 1260 | 104 / 38 | |
| FANUC | DiS 1000/200 | DiS 500/250 | |||
| Peak / Continuous Torque | Nm | 1900 / 840 | 2800 / 1400 | ||
| Speed Reduction Ratio | 1/1 | 1/1 | 1/120 | ||
| Allowable Max. Rotation Speed | r.p.m | 100 | 90 | 25 | |
| Encoders Type | HEIDENHAIN | ECN-225(±10") or RCN226(±5") | |||
| Drive Pressure / Method | kg/cm2 | 35 / Hydraulic | |||
| Clamping Torque | kg.m/N.m | 250/2450 | 450/4410 | 450/4410 | |
| Allowable Load Capacity | 0° | kg | 500 (With Tail-Stock) | ||
| 0°~90° | kg | 300 (With Tail-Stock) | |||
| Net Weight | kg | 1220 | |||
- Note:
- 1.※Positioning accuracy according to encoder type.
2. There are high-speed for option; please contact us for more details if necessity.
Related Prodcuts
TANSHING ACCURATE INDUSTRIAL CO., LTD.
- Taiwan
- No 1-1, Lane 165, Sec, 1, Tan-shing Rd., Taichung City 42743, Taiwan
- 886-4-25384978
- 886-4-25384980