TAILIFT CO., LTD.
Tel:886-49-2254300 Fax:886-49-2254302
Address:No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
Detail Information
Description :
*Tailift built-in operation interface.
*By Optical fiber transmission to achieve Nano Interpolation, Highest-Performance, High Speed, High Accuracy ,High Quality.
*High Efficiency : High Cutting Speed, Cost Effect, Faster Investment Recovery.
*Low Wear Down : High Thickness Sheets Processing.
*Low cutting gas consumption : Stainless Steel Sheets can processed by air also.
*Low Energy Consumption and Eco-friendly : Power Consumption is 20%-30% of Co2 Laser Cutting Machine.
*Low Maintenance Cost : no adjustments of light path, no mirror.
*Closed Frame Base with Gantry Type (Dual-Drive) Integrated Servo Control System to Increase Working Speed and Efficiency.
*Double Working Table Saves Loading/Unloading Time and Increase Productivity.
*High Cutting Speed at Thin Sheets and Stable Cutting at thick sheets.
*Full Covered Machine Body with OD6+ Fiber Protection Safety Glass Window Ensure the Operator Safety and Effectively controls the Laser Radiation in the *Environments, Good Light Probation.
*Dust Collection System with Divided Areas: The machine is equipped with a fully enclosed splash guard for optimal machining safety. An automatic dust collection system collects dusts and waste gases in divided areas during cutting operation, ensuring a pollution-free working environment.
Specification :
| Model | Unit | FL3000 | |
| Movement method | 3xes simultaneausly controlled | ||
| Control method | FANUC NC:31i-LB | ||
| Machining range(X*Y) | mm | 3050*1525 | |
| Travel(X*Y*Z) | mm | 3100*1550*100 | |
| Machining speed | m/min | (MAX)1t=45m/min(Stainless Steel) | |
| Feed rate | m/min | 170 | |
| Acceleration | 2G | ||
| Min.positioning accuracy(X/Y) | mm | 0.05/500 | |
| Repeatability accuracy | mm | ±0.02 | |
| Power sorece | AC 3 ph. 4wires 380V 50Hz | ||
| Power supply | KVA | 74 | |
| Resonator | FANUC FIBER LASER FF3000i-MODEL A | ||
| Wave length of laser | nm | 1070±10 | |
| Laser soure position | Beside the machine | ||
| Laser head | Automatic focus pre-adjustment cutting head | ||
| Focusing distance for laser head | F125 Optional | F150 Optional | |
| Mixed gas for resonator | Depends on resonator specif. | ||
| Auxiliary gas for cutting | Oxygen 10bar ; Nitrogen 25bar | ||
| Table type | Hydraulic lifting system | ||
| Pallet change time | s | 30 | |
| Max.workpiece load | kg | 600 | |
| Machining accuracy | mm | 894*4790*2700 | |
| Approx.machine weight | ton | 12.05 | |
| Cutting Capacity chart | Sheet metal thickness | ||
| Mild Steel | mm | 16 | 20 |
| Stainless Steel | mm | 10 | 12 |
| Aluminum | mm | 10 | 12 |
| Copper | mm | 6 | 6 |
| Brass | mm | 8 | 8 |
TAILIFT CO., LTD.
- Taiwan
- No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
- 886-49-2254300
- 886-49-2254302