TAILIFT CO., LTD.
Tel:886-49-2254300 Fax:886-49-2254302
Address:No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
Detail Information
Description :
1.The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up and vertical down, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
2.Exclusively for gears type cycling oil pump is furnished to cool off precise gears inside gear box, and minimize excessive wear on gears to lowest extent.
3.Friction type disc clutch is adopted to absorb impact force caused by vertical movement of spindle, and effectively protect all transmission unit inside gear box. With the function of quick spindle return, this clutch will also help us to speed up our tapping operation.
4.Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage . It will keep us from injurious dropping whenever the copper nut is excessively worn.
5.Equipped with hydraulic STEP BY STEP clamping system, with proper selection on push button switch, column, arm, gear box can be clamped/released independently.
Specification :
| MODEL | TPR-1230H | |||
|---|---|---|---|---|
| Dai.of column | 330 | A | ||
| Distance from column surface to spindle center , Max | 1170 | D+C | ||
| Distance from column surface to spindle center , Min | 340 | C | ||
| Travel of spindle head | 890 | D | ||
| Distance from base surface to spindle end , Max | 1370 | E | ||
| Distance from base surface to spindle end , Min | 490 | F | ||
| Elevating height of Arm | 630 | E-F-I | ||
| Effective area of box table | 635×520×415 | L×K×H | ||
| Dimension of base | 1725×715×180 | R×S×Q | ||
| Taper hole spindle | MT#4 | |||
| Stroke of spindle | 250 | I | ||
| R.P.M of spindle (rpm x steps) | 44-1500×12 steps | |||
| Feed of spindle (rev. x steps) | 0.05 , 0.09 , 0.15×3 steps | |||
| Main motor (HP) | 3HP | |||
| Elevating motor (HP) | 1HP | |||
| Hydraulic clamping motor (HP) | 1HP | |||
| Coolant equipment (HP) | 1/8 HP | |||
| Machine height from floor (Max.) | 2780 | M | ||
| Base + column height | 2060 | G | ||
| Net weight (approx)kgs | 2100 | |||
| Shipping weight (approx)kgs | 2300 | |||
| Shipping dimensions (LxWxH) | 2035×995×2240 | |||
| Capacity | Drilling | Stell | 42Ø | |
| Cast iron | 55Ø | |||
| Tapping | Stell | 25Ø | ||
| Cast iron | 38Ø | |||
TAILIFT CO., LTD.
- Taiwan
- No.170, Chenggong 3rd Rd., Nantou City, Nantou County 54066, Taiwan
- 886-49-2254300
- 886-49-2254302