Description :

XM-23R2G is 2 Ports 1000 Mbps Ethernet test module for SFP connectors. The major benefits include optimized for testing Ethernet device and environment and layer 2 to 7 traffic simulation, including any user defined pattern or recently developed protocol etc.

Specification :

1. Interface: 2 SFP 1000 Mbps ports. 2. Speed and mode: 1000Mbps full duplex Only. 3. CPU: MPC852T. 4. Preamble: 4~16 bytes. 5. Frame length(w/o VLAN Tag): 48 ~ 8192 bytes fixed / increase / Random / loop / decrease. 6. Data field: system defined/ user defined/ random. 7. Inter frame gap: fixed/ random; 1000 Mbps: 48 ns ~ 0.2 sec. 8. Data integrity / sequence: yes. 9. Source/ destination MAC address: fixed / increase / decrease / Random; variable fields can be set depends on UI, max length of each field is 32-bit. 10. Source/ destination IP address: fixed / increase / decrease / random. 11. IP/TCP generation/ analysis: hardware. 12. VLAN(VLAN ID/COS field): (VLAN ID / COS field): fixed / increase / decrease / random. 13. MPLS(Label/COS/TTL firld): fixed / increase / decrease / random; (No. of labels not limited). 14. Flow control: default as reception. 15. Capture buffer size: 32MB per port, (up to 256k frames). 16. Capture mode: event. 17. Capture event: all condition, CRC error, DI error, serial No. error, alignment error, IP checksum error, trigger 1 ~ 8, trigger logic, any defined packet size. 18. QoS testing: up to 8 priority queues. 19. Line performance: wirespeed. 20. Error packet generation: No CRC, CRC error, alignment error, IP checksum error, dribble error.

Features :

1. XM-23R2G:
2 Ports 1000 Mbps Ethernet test module with SFP connectors.
2. Traffic generation and analysis:
(1) Synchronous generation and analysis of layer 2 to 7 traffic.
(2) Wirespeed generation and capture or analysis of Ethernet traffic.
(3) User pattern based packet generation.
(4) Single / burst / multi-burst / continuous packet generation.
(5) Generation of packets for protocols such as IP, UDP, IPX, TCP, IGMP, MPLS, VLAN, OSPF and user-defined protocols.
3. Capturing capabilities:
(1) Buffer size: 32MB per port (up to 256k frames).
(2) Full protocol decode suite supported by NuWIN.
(3) Capture triggers: 8 Triggers per port with support logic operation.
4. Plenty of counters including standard RMON, User trigger and other useful counters.
5. X-Trailer for frame data integrity verification.
6. Various protocols response including ARP and Ping.
7. BERT for transmission quality assurance for telecom users: PRBS 2^7-1, 2^15-1, 2^23-1, 2^31-1.

• 
  Rapid Matrix Modules
• 
  Rapid Matrix Modules
• 
  Rapid Matrix Modules
• 
  Rapid Matrix Modules
• 
  Rapid Matrix Modules
• 
  Burst Mode Matrix Modules
• 
  Burst Mode Matrix Modules
• 
  Burst Mode Matrix Modules

More