Description :

2-Wheel(STD):
1. High dissolved oxygen(DO).
TAI-YIH SUN paddle wheel generate the dissolved oxygen higher than other brands do. Because years of continuous R&D and design of TAI-YIH SUN larger paddle wheel-used impeller with relatively wide of 220m/m and draft of 90m/m. While TAI-YIH SUN paddle wheel can water up to 20M long, therefore, all of the dissolved oxygen can be higher.
2. High quality (long life):
TAI-YIH SUN paddle wheel life is over 5 years due to high quality spare parts and precise machine processing. The most important parts of paddle wheel are the reducer and motor. TAI-YIH SUN reducer and motor are made by the multi-channel precise machine processing to achieve ISO-9001 quality standards.
3. Low power consumption:
(1) TAI-YIH SUN paddle wheel can provide a high level of dissolved oxygen and large water flow.
(2) TAI-YIH SUN motor is the culmination of years of R&D for a low power consumption and high efficiency. By the dynamic balance of motor machine test, TAI-YIH SUN motor test report can show the motor loading, low power consumption, and high efficiency. Also there are large torque, however these motor are not easy burned due to the electric current over loaded.
4. High efficiency:
(1) TAI-YIH SUN paddle wheel with high level of dissolved oxygen, large water current, and low power consumption, also durable and long life.
(2) [energy-saving is particularly important to reduce carbon].
SAE(kg.O2/kw.hr): 1.05 / SOTR(kg.O2/hr) : 0.84 / Elec.Current(Ampere): 1.56
Pinput(KW): 0.8/Water Flow(cm/sec): 14.

Specification :

1. Motor: 1HP x 4P x 3(mm)/Tai Yih Sun Brand.

2. Worm gear: 1:14(50Hz), 1:17(60Hz)(mm)/Gear: aluminum bronze.

3. Stainless steel frame: 370W x 1150L(mm)/AISI 304 stainless steel.

4. Floating boat: 300 x 210 x 1800(mm)/H.D.P.E.

5. Wheel: 220W x 670(mm) /nylon.

6. Stainless steel shaft: 25 x 700L(mm)/AISI 304 stainless steel.

7. Stainless steel movable joint: 25 x 90 x 90(mm)/AISI 304 stainless steel.

8. Engine cover: 200 x 290 x 610(mm)/H.D.P.E.

9. Pillow block: 120H x 220L(mm)/nylon.

10. Machine setting bar: 3/4" S.G.P. x 2000(mm)/galvanized steel bar.

• 
  VIBRATION MOTOR
• 
  INDUCTION MOTOR
• 
  Induction Motors
• 
  Low Power Consumption Paddle Wheels
• 
  Wheel Paddle Wheels
• 
  INDUCTION MOTOR
• 
  Bevel Gears
• 
  Worm Gears