Description :

Slip joint pliers are pliers whose pivot point or fulcrum can be moved to increase the size range of their jaws. Most slip joint pliers use a mechanism that allows sliding the pivot point into one of several positions when the pliers are fully opened.

Needle-nose pliers (also known as long-nose pliers, pinch-nose pliers, or snipe-nose pliers) are both cutting and gripping pliers used by electricians and other tradesmen to bend, re-position and cut wire. Their namesake long gripping nose provides excellent control and reach for fine work in small or crowded electrical, while cutting edges nearer the pliers' joint provide "one-tool" convenience. Given their long shape, they are useful for reaching into cavities where cables (or other materials) have become stuck or unreachable to fingers or other means. They are often in toolboxes alongside Hammers and screwdrivers.

Diagonal pliers (or wire cutters or diagonal cutting pliers or diagonal cutters) are pliers intended for the cutting of wire (they are generally not used to grab or turn anything). The plane defined by the cutting edges of the jaws intersects the joint rivet at an angle or "on a diagonal", hence the name. Instead of using a shearing action as with scissors, they cut by indenting and wedging the wire apart. The jaw edges are ground to a symmetrical "V" shape; thus the two jaws can be visualized to form the letter "X", as seen end-on when fully occluded. The pliers are made of tempered steel with inductive heating and quenching often used to selectively harden the jaws. Diags or Dikes (a portmanteau of "Diagonal CutterS" is pronounced "dikes") – as in the phrase "a pair of dikes" or "hand me those dikes" – is jargon used especially in the electrical industry, to describe diagonal pliers. Dike can also be used as a verb, such as in the idiom "when in doubt, dike it out". In the United Kingdom and Ireland, diagonal pliers are commonly referred to as snips, and in Australia and Canada they are often referred to as side cutters.

Lineman's pliers (US English), also called combination pliers are a type of pliers used by electricians and other tradesmen primarily for gripping, twisting, bending and cutting wire and cable. Linemen's pliers owe their effectiveness to their plier design, which multiplies force through leverage. Lineman's pliers have a gripping joint at their snub nose and cutting edge in their craw. Some versions include either an additional gripping or crimping device at the crux of the handle side of the pliers' joint. Lineman's pliers typically are machined from forged steel and the two handles precisely joined with a heavy-duty rivet that maintains the pliers' accuracy even after repeated use under extreme force on heavy-gauge wire.

Specification :

• CARBON STEEL 
• PVC COATED HANDLE 
• COUNTRY OF ORIGINAL: CHINA

CONTENTS: 

• 8" SLIP JOINT X1
• 8" LONG NOSE X1
• 7-1/2" DIAGONAL X 1 
• 8" LINESMAN X1
• 10" GROOVER X1

• 
  LINESMAN PLIER
• 
  BENT LONG NOSE PLIER
• 
  DIAGONAL PLIER
• 
  DIAGONAL PLIER
• 
  LONG NOSE PLIER
• 
  8" Slip Joint Plier
• 
  7" Wire Stripping Plier
• 
  LINESMAN PLIER

More