Shun Chuan Precision Machinery Co., Ltd.
Tel:886-37-741591 Fax:886-37-741593
Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
Detail Information
Description :
?All models with one piece solid stand.
?All models with universal feed gearbox & reversable apron.
?All models meet CE. (on request)
?All models with 80mm (3.149") spindle bore, ASA D1-8.
?All models cross slide is hardened and ground to prolong operation life.
?All castings are properly stabilized and stress relieved.
?Bed ways are hardened & ground to min. HS-70.
?Turcite B coating between the bed and carriage.
?Extremely low noise level.
?Foot brake pedal provided.
?Built-in coolant pump & fitting provided.
?Wider bed way which give absorbs vibration.
Specification :
STANDARD ACCESSORIES:
- Backplate for 10" chuck
- Dead center MT.5
- Dead center MT.4 with carbide tip
- Spindle center sleeve........Ø85mm Taper 1/19.18
- Level pads......6 pcs
- Tool set & Box
- Operation manual & parts list
OPTIONAL ACCESSORIES:
- 3-Jaws scroll 10" chuck
- 4-Jaws independent 12" chuck
- 5C collet closer attachment
- 5C collets (metric or inch)
- Faceplate 14"
- Chuck safety guard
- Hydraulic copying attachment
- Tool post grinder attachment
- Taper turning attachment
- Electrical system for CE
- Protect cover on leadscrew for CE
- Steady rest w/ball bearing
- Follow rest w/bronze tip
- Drill chuck & arbor
- Rotating center MT.4
- Halogen lamp
- Quick change tool post
- Carriage micro stop set
- Digital read out system
- Full length splash guard
SPECIFICATIONS:
| MODEL | SR-1840 | SR-1860 | SR-2140 | SR-2160 | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Height of centers | 231 mm (9.09") | 271 mm (10.67") | |||||||||||||||||||
| Swing over bed | Ø462 mm (18.19") | Ø542 mm (21.34") | ||||||||||||||||||||
| Swing in gap | Ø650 mm (25.6") | Ø730 mm (28.74") | ||||||||||||||||||||
| Swing over cross slide | Ø307 mm (12.1") | Ø387 mm (15.23") | ||||||||||||||||||||
| Distance between centers | 850 mm (33.46") | 1350 mm (53.15") | 850 mm (33.46") | 1350 mm (53.15") | ||||||||||||||||||
| Width of bed | 305 mm (12") | |||||||||||||||||||||
| Gap width in front of faceplate | 165 mm (6.5") | |||||||||||||||||||||
| Headstock and Main Spindle | Spindle nose, internal taper | D1-8, Ø85 mm Taper 1/19.18 | ||||||||||||||||||||
| Spindle center sleeve | Ø85 mm Taper 1/19.18 x MT. No.5 | |||||||||||||||||||||
| Spindle bore | Ø80 mm (3.149") | |||||||||||||||||||||
| 12 steps / 30~1500 R.P.M.
| |||||||||||||||||||||
| Carriage | Length on bed / Width of carriage | 440 mm (17.32") / 477 mm (18.77") | ||||||||||||||||||||
| Cross slide travel | 272 mm (10.7") | |||||||||||||||||||||
| Top slide travel | 160 mm (6.3") | |||||||||||||||||||||
| Threads and Feeds | Whitworth threads: Kinds / Range | 45 Kinds / 2~72 T.P.I. | ||||||||||||||||||||
| Metric threads: Kinds / Range | 39 Kinds / 0.2~14 mm | |||||||||||||||||||||
| D.P. threads: Kinds / Range | 21 Kinds / 8~44 D.P. | |||||||||||||||||||||
| M.P. threads: Kinds / Range | 18 Kinds / 0.3~3.5 M.P. | |||||||||||||||||||||
| Longitudinal feeds | 0.04~1.0 mm (0.0015"~0.04") | |||||||||||||||||||||
| Cross feeds | 0.02~0.5 mm (0.00075"~0.02") | |||||||||||||||||||||
| Tailstock | Quill diameter | Ø68 mm (2.677") | ||||||||||||||||||||
| Quill travel | 153 mm (6") | |||||||||||||||||||||
| Taper of center | MT.No.4 | |||||||||||||||||||||
| Motor | Main spindle | 7.5HP | 10HP | |||||||||||||||||||
| Coolant pump | 1/8HP | |||||||||||||||||||||
| Measurement | Weight (Net /Gross) Approx. | 1700 / 2000 kgs | 1850 / 2150 kgs | 1750 / 2050 kgs | 1900 / 2200 kgs | |||||||||||||||||
| Packing sizes | Length | 2400 mm (94.5") | 2900 mm (114.2") | 2400 mm (94.5") | 2900 mm (114.2") | |||||||||||||||||
| Width x Height | Width 1155 mm (45.5") x Height 1900 mm (74.8") | |||||||||||||||||||||
Specifications subject to change without notice.
Shun Chuan Precision Machinery Co., Ltd.
- Taiwan
- No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
- 886-37-741591
- 886-37-741593