Description :

Each machine consists of:
1. Unwinding unit:
(1) Two working position of unwinding (one standby, one unwinding).
(2) Powder brake to control the unwinding.
(3) Tension control device to control the tension.
(4) Sensor control no-stop fabric roll switch-over.
(5) EPC for unwinding.
(6) Corona system for two-sides treatment.
2. Full auto printing unit for the first side printing (center drum):
(1) CI type & direct printing on fabric for color (image) printing.
(2) Fabric guiding device equipped for feeding.
(3) Expansion roller to make the fabric even.
(4) 1 pc of center drum for fabric printing.
(5) 6 sets of printing roller, anilox roller and rubber roller for 6 colors.
(6) 6 sets of ink motor to mix the ink all the time.
(7) 5 sets of pre-blower for each printing unit.
(8) 6 sets of auto-recirculation/mixing system for paint mixture (air pump).
(9) After printing, fabric will go through center oven for complete drying.
(10) Inverter control the speed.
3. Center oven for drying
(1) Two parallel heaters equipped for separation drying of two sides.
(2) Airtight design to save power.
(3) Adjustable type for different circumstances.
(4) Fan and heater for complete drying.
4. Full auto printing unit for the second side printing (center drum):
(1) EPC equipped for the second side printing.
(2) CI type & direct printing on fabric for color (image) printing.
(3) Fabric guiding device equipped for feeding.
(4) Expansion roller to make the fabric even.
(5) 1 pc of center drum for fabric printing.
(6) 6 sets of printing roller, anilox roller and rubber roller for 6 colors.
(7) 6 sets of ink motor to mix the ink all the time.
(8) 5 sets of pre-blower for each printing unit.
(9) 6 sets of auto-recirculation/mixing system for paint mixture (air pump).
(10) After printing, fabric will go through center oven for complete drying.
(11) Main motor equipped for driving.
5. Rewinder
(1) EPC equipped for rewinding.
(2) tension control device to control the tension.
(3) surface winding with auto roll-changing device.
(4) auto heat cutting to changing the fabric roll.
(5) protection unit for emergency stop.
6. Electrical control panel
(1) 1 set of abb inverter for unwinding.
(2) 1 set of abb inverter for winding.
(3) 1 set of abb inverter for main motor.
(4) 1 set of siemens plc to control the whole line.
(5) 1 set of siemens touching monitor for setting/display/record.
7. Air compressor: 5.5hp 1 set.

Machine feature:
1. Single-pass, two side printing.
2. High precision color positioning , direct printing for color (image) printing.
3. No-stop fabric roll switch-over.
4. Easy to change printing roller for differ size printing.
5. Edge position control (epc) for winding and unwinding.
6. Corona system for two-sides treatment.
7. Automatic tension control.
8. Auto recirculation/mixing system for paint mixture.
9. Center oven for complete drying.
10. Main motor driving with inverter control, sync printing.

Specification :

Technical specifications: 1. Suitable materials: bopp film, woven fabric, paper, non-woven. 2. Color: 6+6, 6+5, 6+4 or less, color printing. 3. Max. Fabric width: 800mm. 4. Max. Printing area(L x W): 1250 x 720mm. 5. Max. Bag making size (L x W): 1250 x 800mm. 6. Thickness of printing plate: 4mm. 7. Anilox roller: 250line/inch2. 8. Printing speed: 80-120m/min. 9. Power connection: 49.5hp. 10. Machine weight: about 22t. 11. Dimension (lay-out): 20000x2800x4000mm.

• 
  PP/HDPE Yarn Extrusion Lines
• 
  4 Shuttle Circular Looms
• 
  CI Roll-To-Roll Printing Machine For Woven Bags
• 
  Center-Impress Style Flexo Printing Machines
• 
  Single Side 5-Colors Printing Machines For Woven Bags
• 
  CI Roll-To-Roll Printing Machines (For Paper Bags With Cutting)
• 
  Multi-Wall PP Paper Bag Making Machines
• 
  Bag Cutting And Sewing Machines

More