Description :

Our drilling machines have over 10 patents. Their drilling-speed is the fastest in Taiwan. No other brand can overtake on the most convenience and the shortest preparing time. The drilling speed is over 20% from other brand. The really two independent spindle machine – TACO series – can save you more space and more time. If you buy single spindle model, you can upgrade to really two independent spindle model. It's more elasticity for your plan on equipment.

●Laser-Center Holes checking:
Patented design for dross center of drill, graph-recognition, teaching and inputting → Time-saving, preciousness & concenience.
Searching Margin operation:
Home point (first point)+any point on X or Y direction.
●Auto feeding:
Z-axis pushed by independent hydraulic + measure tool length by encoder. Auto controlled on quick feeding position, reduce speed position, tool return timing and position. Achieves the boundary of automatic management.
Home point (first point)+any point on X or Y direction.
●Spindle:
Home point (first point)+any point on X or Y direction.
●Searching Margin operation:
Special-purpose of BT-40 spindle developed by ourselves ， use high-life, stop-push rolling-ball bearing. And direct-type of BT-40 can make sure to keep back the strength when cutting.direction.
●Spindle Stroke:
400m/m , suitable for any length of drill bits.
●Shank:
To use BT-40 quick-change shank, High precious and low cost.
●Marking:
It can quick marking, and also can quick hole-checking by Laser cross.
●Auto-balance position for hoist:
Machine can be collected by hanging to save space. Before hanging, you just push hanging button, the spindle will move to balance point position automatically. And this balance point position may pass through the parameter revision.
Home point (first point)+any point on X or Y direction.
●Hole-pattern Input:
Patents CNC graphics software attached to coordinates rotation and traverse compensation. Programming
1. graphic dialogue inputting
2. coordinates inputting
3. teaching inputting
4. file transferred by DXF
●Operation Protection Buttons
Spindle not move to working area when loading/unloading workpieces
●High Speed Drilling
High-rigid machine & efficient coolant system 0.35 mm/rev & 2.0 mm/sec when drilling ? 28
●Multi-Location Process
10 kinds of same/different jobs or 20 processing locations for smaller workpieces Auto-process 20 piles of workpieces after working-hours
●Auto Power-off
Programmed auto power-off after last process cycle
●Auto Lubricating System
Auto lubrication feeding → Longer life
●Servo-Driven Tool-Feeding
Servo-driven tool-feeding → Stable in high-speed
Decelerate to give longer tool life when tools on surface of workpiece
Higher speed in workpieces
●Processing Multi-Hole Connecting-Plates for Bridges
Suitable for a dozen of multi-hole groups

Specification :

●Fast-Marking Fast-marking to locate holes ●Position Check or Supports Adjustment Laser cross to recognize markings . Position Check or Supports Adjustment . Marking checking before loading workpiece in order to adjust supporting positions avoids drilling to damage the error-placed supports. ●Holes Checking Patented design for cross center of drill, to check the holes position. ●High Torques & Revolutions Motor TECO Motors → High torques for bigger diameters. High revolutions for smaller diameters. Suitable for a dozen of multi-hole groups. ●Cranes of Lightweight & High Performance (Option) German ABUS HB Crane to lift all workpieces. Built-in Teflon wheels → Lowest resistance 0.001

• 
  Drilling Machines
• 
  Drilling Machines (Sheet Metal Machinery)
• 
  Drilling Machines
• 
  Gantry Type Drilling Machines