Description :

1. Hardware specification for G-force recorder:
(1) Power input +7 Volt to +37VDC.
(2) On board back-up battery 5V 0.33F Super cap).
(3) SD card slot for data backup (up to 2GB).
(4) 4 LED indicators on two RJ45 connectors.
(5) On board real-time clock.
(6) Serial input for GPS signal (9600 Baud rate) on RJ45.
(7) Serial I/O port for external communication (9600 Baud rate) on RJ45.
(8) G-force sensor with selectable sensitivity for 3 axes (+-1.5g/+-6g ).
(9) 6-LED G-force strength display with buzzer (optional) on RJ45.
1. A-511S high performance high sensitivity GPS smart receiver.
2. General description: the A-511S smart GPS receiver is a total solution GPS receiver, designed based on SiRF Star III architecture. This complete enabled GPS smart receiver provides high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities.
3. The A-511S smart GPS receiver is ideal for many applications such as car navigation, mapping, surveying, security and so on.
4. Key product features:
(1) Built-in SiRF star III chipset.
(2) 200,000 effective correlators for fast TTFF.
(3) 20 channels "All-In-View" tracking.
(4) Cold/warm/hot start time: 42/38/1 sec. (average).
(5) Superior sensitivity: -159dBm tracking.
(6) Reacquisition time: 0.1 sec.
(7) Low power design (75mA, tracking).
(8) Built-in low noise, high gain active antenna.
(9) Super-cohesive magnetic for installation.
(10) Apply to host devices with TTL/RS232.
(11) Size: 47.0 (L) X 39.0 (W) X 16 (H) mm.
(12) Weight: 66.6g.
5. Applications:
(1) Automotive.
(2) Asset tracking.
(3) Personal/portable navigation.
(4) Location based services enabled devices.
(5) Sports and recreation.
(6) Geographic surveying.
6. Benefit to users:
(1) Low power consumption.
(2) Easy and fast to install.
(3) Superior urban canyon performance.
(4) Competitive cost with high performance.
7. General description
(1) The A-511S smart GPS receiver is a total solution
GPS receiver, designed based on SiRF Star III
architecture. This complete enabled GPS smart
receiver provides high position, velocity and time
accuracy performances as well as high sensitivity and
tracking capabilities.
(2) The A-511S smart GPS receiver is ideal for many
applications such as car navigation, mapping,
surveying, security and so on.
a. Automotive.
b. Asset tracking.
c. Personal/portable navigation.
d. Location based services enabled devices.
e. Sports and recreation.
f. Geographic surveying.

Specification :

Applications: 1. Key product features (1) Built-in SiRF Star III chipset. (2) 200,000 effective correlators for fast TTFF. (3) 20 channels “All-In-View” tracking. (4) Cold/Warm/Hot start time: 42/38/1 sec.(average). (5) Superior sensitivity: -159dBm tracking. (6) Reacquisition time: 0.1 sec. (7) Low power design (75mA, tracking). (8) Built-in low noise, high gain active antenna. (9) Super-cohesive magnetic for installation. (10) Apply to host devices with TTL/RS232. (11) Size: 47.0 (L) x 39.0 (W) x 16 (H) mm. (12) Weight: 66.6g. 2. Benefit to users: (1) Low power consumption. (2) Easy and fast to install. (3) Superior urban canyon performance. (4) Competitive cost with high performance. 3. Specifications: (1) Key technology SiRF Star III chipset dimensions. (2) Performance W x L x H (mm) 39 x 47 x 16. (3) Receiver W x L x H (inch) 1.54 x 1.85 x 0.63. (4) Frequency L1, 1575.42MHz weight. (5) 66.6g (2m, cable included). (6) 112.2g (5m, cable included). (7) C/A Code 1.023MHz chip rate power DC 3.7 ~ 6V, typical 5V. (8) Channel 20 channels all in view Inter.