Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
?Spindle speed STD. 10000rpm
OPT. 12000rpm
15000rpm
20000rpm
24000rpm
?Spindle motor M70V-B 5.5/3.7kw
0iMD 5.5/3.7kw
?Rapid traverse X,Y,Z: 48/48/48 m/min
?X axes travel 400mm
?Y axes travel 500mm
?Z axes travel 400mm
?Magazine capacity 20+1
?ATC time (T-T) 2.2sec
?Table size Φ255mm
Specification :
| Unit | A5X403 | ||
| Table size | mm | Ø255 | |
| Max. Table load | kgf | 50 | |
| Max. Workpiece dimension (Ø x height) | mm | Ø360 × 250 | |
| Min. Indexing precision of c axis rotary | degree | 0.001 | |
| Cumulative indexing precision of C axis | sec | 15 | |
| C axis repeatability accuracy | sec | 4 | |
| Slope angle of A axis | degree | ±110 | |
| Cumulative indexing precision of A axis | sec | 60 | |
| A axis repeatability accuracy | sec | 8 | |
| Max. Speeds for A, C axis | rpm | 33.3 | |
| X, Y, Z axis travel | mm | 400 x 500 x 400 | |
| 3 axes rapid traverse | m/min | 48 / 48 / 48 | |
| 3 axes bidirectional accuracy of positioning | mm | 0.005 / 300 | |
| 3 axes bidirectional repeatability of positioning | mm | ±0.003 | |
| Spindle speeds | rpm | 10000 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS 403 P30T-1(45°) | ||
| Spindle driving | Direct-drive | ||
| Spindle nose to table | mm | 30~430 | |
| Spindle centre to Z path | mm | 570 | |
| Spindle motor | Mitsubishi | kw | 5.5 / 3.7 |
| FANUC | kw | 5.5 / 3.7 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| A drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| C drive motor | Mitsubishi | kg | 1.0 |
| FANUC | kg | 1.0 | |
| Magazine capacity | no. | 20+1 | |
| Max. tool weight | kg | 4 | |
| Max. tool length | mm | 200 | |
| Max. tool diameter | mm | 80 | |
| ATC time (T-T) | sec | 2.2 | |
| Tool change type | l | Arm type | |
| Tank volume | W | 260 | |
| Coolant pump rate | l/min | 600 x 2pcs | |
| Flow rate | 136 | ||
| Chip flush type | Flushing type | ||
| Auto. chip conveyor | kg | OP | |
| Net weight | mm | 3900 | |
| Floor space | 1815 x 3032 x 2700 | ||
* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959