Ares Machinery Co., Ltd.
Tel:886-4-24925555 Fax:886-4-24966959
Address:No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
Detail Information
Description :
?Standard spindle speeds 10,000 rpm
?Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm (Mitsubishi)
?Rigid tapping 4,000rpm
?Spindle nose taper BT30 (STD)/BBT30 (OPT)
?3 axes rapid traverse X, Y, Z: 48 / 48 / 60m/min
?Fully enclosed heat isolated electric cabinet
?High Speed mechanical ATC system T-T: M 1.7 sec F 2.6 sec
?Directly coupled spindle drive system
Specification :
| Unit | R6030 | ||
| Table size | mm | 700 x 410 | |
| Max. Table load | kgf | 200 | |
| X, Y, Z axis travel | mm | 600 x 400 x 300 | |
| Table to spindle nose | mm | 155 ~ 455 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS403 P30T-1 (45º) | ||
| Spindle motor | Mitsubishi | kw | 5.5 / 3.7 |
| FANUC | kw | 3.7 / 2.2 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Spindle speeds | rpm | 10000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 60 | |
| Magazine capacity | 14 | ||
| Max. tool weight | kg | 3 | |
| Max. tool length | mm | 200 | |
| ATC time | sec | M 1.7 / F 2.6 (T-T) | |
| Net weight | kg | 3100 | |
| Floor space | mm | 1700 x 2750 x 2500 | |
* Tool change time supplied with standard 60Hz power and based on Mitsubuishi controller. For electrical requirements other than this standard, please contact one of our personnel.
Ares Machinery Co., Ltd.
- Taiwan
- No. 256, Tu Cheng Rd., Da-Li Dist., Taichung City 412, Taiwan
- 886-4-24925555
- 886-4-24966959