BJTEK Navigation Inc.
Taiwan Manufacturers, Exporters.
Detail Information
Description :
Small size and ruggedness, demand of lorry locating and car navigation GPS antenna that will sustain harsh environment.
The antenna system GA50C is the integration of the high performance GPS patch antenna and a low noise amplifier into state-of-the-art low a very low profile/extremely compact/fully waterproof antenna signal enclosure. When connected to a GPS receiver with 2.5~+5.5V DC antenna power it provide excellent signal amplification and out-band-rejection for that receiver.
Features:
GPS antenna with double threaded bolts and through holes for cable routing with course & fine treaded pitch locking for wing-nut fastener and lock-nut to prevent vibrations and un-authorize removal.
Specification :
1. Specifications: (1) Construction: polycarbonate radome,detachable cable/connector for easy mount, rubber-o-ring between top radome and screw base for waterproof. (2) Dimension: 43mm (l) x 45mm (h). (3) Weight: 50 grams (excluding cable & connector). (4) Mounting: base locks. 2. Environmental conditions: (1) Operation temperature: -40°C to +85°C. (2) Storage temperature: -40°C to +100°C. (3) Relative humidity: 95% non-condensing. 3. Cable & connector: (1) Cable: 5 meter RG174/U for car, 5 meter RG58/u for lorry. (2) Pulling strength: 6 kg @ 5sec with molded plastics on connector end for strain relief. (3) Connector available: BNC,TNC,FME (to be adapted), GT5, MCX (OSX), SMA, SMB or SMC in straight or right angle. (4) Optional adapters: universal connector adapter (FME to TNC/BNC/SMA/SMB/MCX). 3. Antenna element: (1) Center frequency: 1575.42 MHz +/-1.023MHz. (2) Polarization: R.H.C.P. (right handed circular polarization). (3) Absolute gain @ zenith: 3 dBic Typ. (4) Gain: 90 o: 2.0dBi min/ 20o: -5.0dBi min. (5) Mounted on the 60mm x 60mm square ground plane. (6) Axial ratio: 90o : 3.0dB max. 4. Low noise amplifier: (1) Center frequency: 1575.42 MHz +/- 1.023 MHz. (2) Gain: 28+/-4.5dB. (3) Bandwidth: 10 MHz min. @S11£-10 dB. (4) Noise figure: 1.5dB typ. (5) Filter: 25dB @ fo± 50MHz/ 35dB @ fo± 100MHz (fo=1575.42MHz). (6) Supply voltages: 2.5 ~5.5V DC. 5. Current consumption: 2.5V: 6.6mA/ 3V: 8.6mA/ 4V: 12.6mA/ 5V: 16.6mA. 6. Output impedance: 50 ohm. 7. Output VSWR: 2.0 max.
BJTEK Navigation Inc.
- Taiwan