Bi Hsin Plastic Industrial Co., Ltd.
Taiwan Manufacturers, Exporters.
Detail Information
Description :
1. Impact-Proof: our pc sheets have high impact strength(approximately 250 times that of glass and 3-5 times that of ordinary corrugated sheets)that makes them virtually unbreakable.
2. TRANSPARENCY AND LIGHT TRANSMISSION: excellent light transmission .its transparency is remarkably comparable to that of glass.
3. Weather-Proof: as sheet's surface have been treated with anti-UV ray agent to resist resin's fatigue caused by the sun, yellowing on sheets' surface would not occur. the protective uv-coatelayer can maintain excellent light transmission of the sheets and prevent the sheets from becoming yellowing.10 years' quality warranty is provided.
4. Flame-Proof: compared with fiberglass(frp),pc sheets have remarkable characteristics of flame resistance and extinguishment to inflammability.
5. Heat and Cold Resistance no deterioration or deformation from-20 to 135 centigrade.
6. Installation and Processing: characteristic of light weight makes the sheets easy for transportation,handling and installation,with good processing performance in drilling, sutting and installing without having risks of breakage.
Specification :
| Property | Test method | Average index |
| Specific | ASTM D792 | 61.20+/-5% |
| Tensile strength | JIS K6735;CNS11335 | 551KGF/CM |
| Elongation | JIS K6735;CNS11335 | 50% |
| Compressive strength | ASTM D695 | 830KGF/CM |
| Modulus of elasticity | ASTM D638 | 3450000psi+/-10% |
| Flexural strength | ASTM D790 | 950kgf/cm |
| Yellowing index | ASTM D1925 | below3.0 |
| (uv-grade apply) | (AFTER EXPOSURE TO SUNLIGHT FOR 3YEARS) | |
| Llight transmittance | wave length 500mm(UV/VIS) | 85% |
| Uv-ray penetrability | wave length 300mm(UV/VIS) | 2.40% |
| (uv-grade apply) | ||
| Weather resustance | (continously exposed to sunlight for 3,000 hours) | yellowing index below 5 |
| (uv-grade apply) | ||
| Impact strength | CNS 11335(1kg.iron ball falls from 120cm height) | unbreakable |
| Inflammability | UV 94V2(CONTACT WITH FLAME FOR 10SECONDS and move away) | self-extinguishing |
| Deflection temperature | ASTM D648,18.6KGF/CM | 135C(The highest temp. is about 120C IN CONTIUNOUS USES) |
| Brittle temperature | ASTM D764 | (The lowest temp.is about -30c continuous uses) |
| Coefficient of liner expension | Pertain to smaller coefficient of synthetic resin |
| #A1 |  | (THICKNESS)(MM) |
| 1.0 1.0 | ||
| 1.5 2.0 | ||
| #A2 |  | 1.0 |
| 1.2 | ||
| 1.5 | ||
| #A4 |  | 1.0 |
| #A5 |  | 0.8 |
| #A8 |  | 0.8 |
| #A9 |  | 0.8 |
Related Prodcuts
Bi Hsin Plastic Industrial Co., Ltd.
- Taiwan