Description :

Application:Chips inserting into TCP and then transferring and unloading.

Specification :

Operational Process

Inserting:

1. Put the Lord plate, TCP and support plate all together on unloading plate (bottom) by labor.
2. Open both side sensors to put the punch-pin of Press Conversion down, then insert the chips into holes of TCP.

Transferring:

1. Put the completed single side dipping of TCP to lower unloading plate by labor.
2. Adjust the height of both spacers first, and then start the two side sensors to put the punch-pin of upper Press Conversion down until to the expected value of chip protrusion.

Unloading:

1. Put the completed two sides dipping of TCP to lower unloading plate by labor.
2. Start the two side sensors to let the punch-pin of upper Press Conversion down and press the chips into unloading plate.

Machines Specification:

1. Dimension: 650 (L) * 450 (W) * 1350 (H) mm
2. Weight: 130 KG

Electric Control

1. Voltage: 3ψ220V
2. Electric current: 1(A)
3. Power consumption: 0.22KW
4. Frequency: 50/60Hz
5. Air Consumption: 0.5 (l/min)

Associate with equipments

1. Associated equipments for chip inserting:
   • Press Conversion (inserting from up) * 1 set
   • Load Plate * 1 pc
   • TCP * 1 pc
   • Unloading * 1 pc
2. Associated equipments for chip transferring:
   • Press Conversion (inserting from up) * 1 set
   • TCP * 1 pc
3. Associated equipments for chip unloading:
   • Press Conversion (inserting from up) * 1 set
   • TCP * 1 pc
   • Unloading Plate* 1 pc

   If you need more detail specification and function in advance, please contact us.

• 
  LGVI-8101 Auto Insert Machine
• 
  LGTT-8102 Auto Transfer Machine
• 
  Auto Harvesting Machines For TCP
• 
  LGAT-013T Air Press Of Chip Loading From Bottom
• 
  LGAT-023T Level Air Press
• 
  LGVI-180280 Loading Machine Through Shaking
• 
  Non-Vacuum Vibration Loading Machine
• 
  Vacuum Vibration Loading Machine

More