Taiwan Manufacturers, Exporters.
Detail Information
Description :
1. Stem: high temperature NYLONG (UL94 V-0) or POM.
2. Case: high temperature NYLONG (UL94 V-0) or POM.
3. Base: high temperature PBT or NYLONG (UL94 V-0).
4. Insert plate: high temperature PBT or NYLONG (UL94 V-0).
5. Terminals: brass (plating silver).
6. Clip: phosphor bronze.
7. Spring: SWP or stainless steerl.
8. Fixed rod: stainless steel.
Specification :
1. Mechanical life: 100,000 cycles min. 2. Electrical life: 10,000 cycles min. 3. Contact rating: 0.3Amps/0.5 Amps @30 VDC/16 VDC. 4. Insulation resistance: > 100MΩ DC250V. 5. Withstand voltage: AC250V 1 minute. 6. Contact resistance: < 50mΩ. 7. Ambient humidity: < 85%RH. 8. Operating temper.: -25℃ to 65℃. 9. Operating force: 200±80gf. 10. Soldering process: hand soldering: use a soldering iron of 30 watts，controlled at 380℃ approximately 3 seconds while applying solder. 11. Wave soldering: when applying wave soldering, the plastic using PA6T. the peak temperature of the wave Oven should be set to 260℃max. Condition for soldering (Reflow & Non-washable Type) Temperature Profile.
