Description :

1. High precision & flexible production.
(1) SA-80CNC – S (HSS saw blade).
(2) SA-80CNC – C (TCT saw blade).
(3) SA-80CNC – C+S (TCT + HSS saw blade).
2. Automation:
(1) Automatic loading magazine for tubing and solid bars up to 6.5 meters in length.
(2) Automatic single or double tube loading, feeding and cutting.
(3) Automatic first and crop cuts separation.
(4) Automatic speed variation during cutting.
(5) Lowest RPM during blade entry.
(6) High RPM after cutting through the tube’s wall.
(7) Lower RPM at re-entry into tube’s lower wall.
3. Highest Production:
(1) Suitable for non-stop, 24 hours operation.
(2) One or two tube’s cutting.
4. Flexibility and ease of use:
(1) Dual blade cutting system – HSS and / or TCT (tungsten carbide tipped).
(2) Touch screen system for operation, file editing and storage.
(3) Self-diagnostics and error display on-screen for troubleshooting.
5. Precision:
(1) +/- 0.1 mm length tolerance (single tube cutting).
(2) Electric servo controlled feeding.
(3) Electric servo controlled cutting.
(4) Floating feeding carriage.
6. Superior design = longer blade life:
(1) Patented backlash eliminating system.
(2) Triple slide structure for vertical moving saw head for smooth cutting through the entire cutting process.
(3) 180 degrees blade holding guides to eliminate.

Specification :

SA-80CNC-S 1. Example 1: (1) Saw blade: HSS titanium nitride coating high-speed steel blade. (2) Work Piece: seamless tubes of JIS SCM415 bearing steel. (3) ? 38.1mm (OD) x 4 mm (Wall) x 29 mm (Length). (4) Tubes Per Feed: 2 tubes. (5) Cycle Time: 5 +/- 1 sec. (6) Production: 11520pcs / 8 hours. 2. Example 2: (1) Saw blade: HSS Titanium nitride coating high-speed steel blade. (2) Work piece: stainless steel solid round bar. (3) ? 50.0 mm (OD) x 12.5 mm (Length). (4) Bars per feed: 1 solid bar. (5) Cycle time: 35 +/- 1 sec. (6) Production: 822pcs / 8 hours. (7) Blade life: approximately 4100 cuts. (Per resharpening) SA-80CNC-C 1. Example 1: (1) Saw blade: TCT Saw blade (throw away type). (2) Work piece: mild carbon steel solid round bar JIS S56C. (3) ? 50.0 mm (OD) x 30 mm (Length). (4) Bars Per Feed: 1 solid bar. (5) Cycle time: 8 +/- 1 sec. (6) Production: 3,600pcs / 8 hours.

• 
  Fully Hydraulic Circular Sawing Machines
• 
  Manual Circular Sawing Machines
• 
  25mm Crop Lengths And High Speed Solid Bar Cutting Machines
• 
  SA-76NC Extreme Speed Tube Cutting Systems: Circular Sawing Machines
• 
  Automatic Cutting & Air Clamping Vise Manual Circular Sawing Machines
• 
  Extreme Speed Tube Cutting And Deburring Systems ( Circular Sawing Machine And Deburring Machines )
• 
  Non-Ferrous Material Circular Sawing Machines
• 
  Automatic Air Clamping Vise Manual Circular Sawing Machines

More