Description :

1. Protection function of electronic starter:
(1) Over-current protection.
(2) No-load protection.(Power consumption at no-load is less than 1W)
(3) A florescent tube malfunction protection.
2. Safety requirement and reliability based:
(1) Life:
(a) Definition: the Electronic Starter fail to lid the lamp indicate the end of life.
(1) Testing condition of life durability:
(a) Normal temperature test: 25℃,test input voltage AC 220V~AC 240V,continue light for 50000Hrs.
(b) Low temperature test: 0℃, test input voltage AC 220V~AC 240V,continue light for 360Hrs.
(c) High temperature test:80℃,test input voltage AC 220V~AC 240V,continue light for 360Hrs.
(d) Lid test:25℃,test input voltage AC 220V~AC 240V,apply 10000 cycle for 25sec on,35sec off/cycle(Note: replace the failed lamp tube and continue the test again in case of break down of lamp tube).
3. Ambient condition for storage:
(1) Stowage condition: temperature -20℃～70℃、25％～95％RH.
(2) Belong to indoor stabilizer.

Specification :

1. Input voltage(V): AC 220V-240V.

2. Power frequency: 50 / 60 Hz.

3. Input power（W）: 38.0W.

4. Input current（A）: 0.17A.

5. Power factor: 99%.

6. Applicable lamp tube: T 8 – 2 0 W.

• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts(T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)
• 
  T8 Electronic Ballasts (T8/T9 Light Tube Suitable)

More