Taiwan Manufacturers, Exporters.
Detail Information
Description :
P-185 has higher viscosity and low irritation on skin. The performances of P-185 are high gloss, good wetting, extremely smooth on surface by hand touch, transparent, not yellowing, good rub resistance, excellent adhesion that can pass the type test, box glueable, no odor and not stick after curing. This product complies with toy safety and health standards, paper recycling and heavy metal content inspection standards.
Specification :
Appearance/Color | Colorless, translucent |
Viscosity(25℃, Ford Cup #4) | 70 ± 10 sec |
Curing speed | One UV lamp (80-82W/per-cm² or 200W/per-inch²), curing speed is about 15M/min. Two UV lamps the curing speedis multiple, and so forth. |
Gloss 60° | 80 ± 5 |
(Reference only. Please refer to the COA of the shipment for specific product specifications).
Characteristics
Physical characteristics | P-185 | S-188 | others |
Curing speed | ◎ | ◎ | ◎ |
Gloss | ○ | ◎ | ○ |
Rub resistance | ◎ | ◎ | ○ |
3Mtype test | ○ | × | × |
Normal type test | ◎ | × | × |
Crack resistance | ○ | ◎ | ○ |
Solvent resistance | ◎ | ○ | ○ |
Symbol：◎：Excellent ○：Good ×：Not good
Suitable substrate
Substrates | P-185 Type test |
Printing paper gold/silver Ink | ○ |
Printing paper stack 4-color | ◎ |
Printing paper UV Ink | ◎ |
PET | ◎ |
PS | ◎ |
ABS | ◎ |
PVC | ◎ |
Symbol：◎：Excellent ○：Good ×：Not good
Operation cautions
1) This product can be applied for varnishing in on-line printing machine, off-line varnishing machine, spot varnishing machine and other several kinds of methods.
2) It can be used directly without adding solvent. For off-line roller application, if the viscosity is too high and paper stick on the roller, it can be helpful to heat the product to 45-50℃ or dilute it by ≤10% toluene.
3) It can be applied directly without primer and have excellent adhesion, gloss, crack resistance and other characteristics.
4) Coating amount suggested to be 3～5g/m2. Real coating amount is depending and to be adjusted on the printing paper and ink thickness.
5) Special inks (ex. reflex blue, pink and so on) are easier to cause smudge and poor high temperature resistance and make the prints apt to be discolored. It needs special attention in the proofing test.
6) The dark part of the Stack four-color and gold / silver ink are easier to make the adhesion weak. It needs special in the proofing test.
7) The above data is provided by our laboratory and for operation reference purposes only. There might be some difference due to actual substrates and UV coating ways. Before applying large quantity, the proofing test of product adaption is required according to the special requirements
Packing and storage
(1) 20kgs/plastic drum; 200kgs/iron drum.
(2) keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing. Product expiration: sealed, 12 months.
(3) This product is non self-ignition, corrosive and explosive. For risk, wear mask and gloves while using and handling, and keep watch to prevent touching and breathing. If skin is contacted, promptly and thoroughly flush skin with plenty of water use soap if available. If irritation persists, seek medical attention. If eye is contacted, rinse eyes immediately with large amounts of water(or 0.9% sterile salt solution)for at least 15 minutes and contact physician as needed.(S26)
(4) Fire point: 102℃(method: ASTM D92). Fire fighting material: foam or CO?extinguisher.
Sample Information
- Total Available Quantity :
- 20 KG
- Per Delivery Quantity :
- N/A KG
- Sample Fees :
- Free
- Freight Fees :
- Varied
- Shipment :
- Air
- Delivery Time :
