Victor Taichung Machinery Works Co., Ltd.
Taiwan Best Manufacturer of CNC Machine Tools & Plastic Injection Molding Machinery
Detail Information
Description :
*Arm-type ATC
Twin arm type ATC (Automatic Tool Changer) performs better overall continuous tool changes compared with disc type tool changer, while at the same time offering faster tool change - merely 3.5 seconds with BT-40 or CT-40 tooling.
*Japanese-made linear motion guideways
Meehanite? casting
All major structural components are made from Meehanite cast iron to ensure consistent homogenous castings.
*Victor Taichung's own spindle
This spindle is supported with angular thrust bearings for large contact areas that easily handles large axial and radial loads, while computer modeling helps determine bearing locations for maximum spindle stiffness.
Specification :
| Item \ Model | Units | Vcenter-102E | |
|---|---|---|---|
| Travel | X axis travel | mm | 1020 |
| Y axis travel | mm | 600 | |
| Z axis travel | mm | 560 | |
| Distance | Spindle center to column | mm | 600 |
| Spindle nose to table surface | mm | 150 ~ 710 | |
| Table | Table work area | mm | 1100 x 510 |
| Dimension of T-slot | mm | 5 x 18 x 100 | |
| Max. table load | kg | 750 | |
| Spindle | Spindle taper | BT-40 | |
| Spindle motor - cont / 30 / 10min | kW | 11/15 | |
| Spindle speed | rpm | 8000 | |
| Feed rate | Rapid feed rate - X / Y / Z | m/min | 24 / 24 / 20 |
| Axis feed motor - X / Y / Z | kW | 2.5 / 2.5 / 2.5 | |
| Cutting feedrate by table | m/min | 7.5 | |
| X/Y ballscrew (dia. x pitch) | mm | 40 x P12 | |
| Z ballscrew | mm | 40 x P10 | |
| Tools | Max. tool length | mm | 250 |
| Max. tool weight | kg | 7 | |
| Magazine capacity | 24 (Round) | ||
| Max. tool diameter (without adjacent tools) | mm | 80 | |
| Tool exchange time | sec. | 3.5 | |
| Pull stud angle | deg. | 90 (opt. 45) | |
| Tool selection method | Random | ||
| Machine | Power requirement | kVA | 30 |
| Min/Max. air pressure | kg/cm2 | 5.5 ~ 6.5 | |
| Coolant tank capacity | L. | 280 | |
| Std. NC controller | FANUC 0iMate-MD | ||
| Floor space requirement | mm | 2750 x 2485 | |
| Max. machine height | mm | 2640 | |
| Net weight | kg | 6100 |
Victor Taichung Machinery Works Co., Ltd.
- Taiwan
- No. 1, Jingke Central 2nd Rd., Nantun Dist., Taichung City 408, Taiwan
- 886-4-23580701
- 886-4-23584541