Description :

1. Has monitoring function. The LED flashes once every 4 ~ 6 seconds.
2. There are two LEDs which can turn 360 and watch the situation of the detector at any angle.
3. It provides the wiring (-R) function of entrance LED.
4. The use of common base is advantageous to the exchange of detector.
5. Fixed temperature on 60°C.
6. The detector has the functions of both smoke detector and temperature detector. As there is smoke getting in the detector, the detector functions and sends out alarm. Meanwhile, it can also be a heat barrier. As the temperature rises and exceed the preset temperature standard, the detector will also function and send out alarm. The detector has two probing ways. It can probe the smoke as well as the change of temperature. It strengthens the probing functions of the detector.

Specification :

1. Model No: HC-207A ionization smoke & heat detector. 2. Adopted voltage: DC-12V. 3. Monitoring electric current: 70μA. 4. Functioning electric current: 43mA. 5. Suitable temperature: -15 ~ 50°C. 6. Suitable humidity: 0 ~ 95% RH. 7. Size: 103mm x 47mm. 8. Weight: 140g. 9. Provide the outside with the maximum value of signal input joint. 10. Volume:DC30V 1A. 11. Mainframe: fire-resisting ABS resin material. 12. Joint terminal: copper rod (zinc-plated). 13. Base: fire-resisting ABS resin material. 14. Copper rod (zinc-plated). 15. Color: ivory. 16. Notes: prohibit from being installed at the places with large volume of smoke and steam lingering, and the inlet and outlet of cold and warm air.

• 
  Flame Detectors
• 
  Fixed Temperature Heat Detector
• 
  Optical Smoke Detectors
• 
  Ionization Smoke Detectors
• 
  Fixed Temperature Heat Detectors (Waterproof)
• 
  Heat Detectors (Electronic Type)
• 
  Rate Of Rise Heat Detectors
• 
  Fixed Temperature Heat Detectors