Description :

S-B18-2(M) Automatic Strip Feeder is to link with press for end stamping or can body drawing. Strip piled pallet is to be sent into lower roller table. Rollers on the table ,driven by a motor, turn and carry the pallet forward. Forks lift strip stack up and gradually lift up. Three suction pads suck strip up one by one and send it out. When strips are not enough, four small stoppers extrude out to temporarily support remnant strips. At the same time, forks immediately lower down to lift second stack up to replenish strips so as to feed strips continuously into press. With simple design and multiple safety devices, easy for maintenance and can size changeover.

Specification :

Machine Type	S-B18-2	S-B18-2M	S-B18-2L
Connecting Width M/C Type	S-B18GL	S-B18 / S-B9B	S-B18GLL
Strip Length	760 - 1065mm	760 - 1040mm	760 - 1065mm
Strip Width	115 - 300mm		230 - 400mm
Capacity Per Min.	40 SPM		40 - 25 SPM
Horse Power Required	1HP x 1 , 1/2HP x 3
Compressor Air Required	3 BAR x 20L/min.
Floor Space Overall Height	2850 x 1870 x 1700 mm	2850 x 1780 x 1700 mm	3170 x 1890 x 1980 mm
Net Weight (approx.)	1600 kgs	1700 kgs	1800 kgs

Features :

1.Strips can be feeded with 180 turnover.
2.With vacuum to pickup strips suitable for steel and aluminum plate.
3. Completely synchronized with Press feeding.
4. Multi-safety design for machine and personnel safety.
5. Easy for can size changeover and adjust.
6. Save operating labor to reduce cost.
7. Can be connected with press model S-B9B,S-B18,S-B18G(5) or S-B18GL, S-B18GLL to save labor cost.
8. A special design robot strip feeding cart is available on request for one S-B37SA and two or three S-B18-2(M) operation.

• 
  Automatic Feeding Machines