Handy-Age Industrial Co., Ltd.
Industrial supplies & consumer products are developed and manufactured either in Taiwan or China
Detail Information
Description :
1. Flat bed type: 40NC/60NC/80NC.
2. Swing over bed: 400mm(17-5/16").
3. Distance between centers: 1000mm(40"), 1500mm(60"), 2000mm (80").
4. Swing over gap: 660mm(26")
Specification :
1. Swing over bed: 40/60/80NC: 400mm. 2. Swing over cross slide: 40/60/80NC: 190mm. 3. High of center: 40/60/80NC: 220mm. 4. Distance between centers: 40NC: 1000mm / 60NC: 1500mm / 80NC: 2000mm. 5. Width of bedways: 40/60/80NC: 330mm. 6. Total length of bed: 40NC: 2000mm; 60NC: 2510mm; 80NC: 3020mm. 7. Swing over gap: 40/60/80NC: 660mm. 8. W in front of faceplate: 40/60/80NC: 190mm. 9. Spindle nose mounting: 40/60/80NC: D1-8 cam lock. 10. Spindle bore: 40/60/80NC: 86mm. 11. Taper of Spindle bore: 40/60/80NC: M.T.#7(Sleeve M.T.#5). 12. Range of spindle speeds: 40/60/80NC: high 2000-240; middle 380-45; low 84-10 RPM. 13. Cross slide travel (X axis, ball screw 25x5mm C5): 40/60/80NC: 280mm. 14. Rapid travel (X axis)/(Z axis): 40/60/80NC: 6m/min (X axis); 8m/min (Z axis). 15. X axis driver motor: 29lb/in (centroid) 7.3Nm AC servo (Fagor). 16. Z axis driver motor: (1) 40NC: 29lb/in (centroid) 7.3Nm AC servo (Fagor). (2) 60/80NC: 40lb/in (centroid) 9.3Nm AC servo (Fagor). 17. Longitudinal travel (Z axis, ball screw 40x10mm C5): 40NC: 920mm; 60NC: 1430mm; 80NC: 1940mm. 18. Max. size cutting tool: 40/60/80NC: 25mm(1")(for quick change tool post). 19. Hydraulic turret (optional): 40/60/80NC: 8 tool section (25mm for square tool, 7/8in for boring tool). 20. Electrical turret (optional): 40/60/80NC: 6 tool section (20mm for square tool, 7/8in for boring tool). 21. Tailstock quill dia. / tailstock quill taper: 40/60/80NC: 75mm(3in) / 40/60/80NC: M.T.#5. 22. Tailstock quill travel: 40/60/80NC: 160mm6-5/16in). 23. Motor: 40/60/80NC-10HP 7.5kw.
Related Prodcuts
Handy-Age Industrial Co., Ltd.
- Taiwan