Taiwan Manufacturers, Exporters.
Detail Information
Description :
1. All sliding surfaces are hardoned and ground for accurate running andlong service repeatability. Lubrication nipple in each master jaw.
2. Base jaw: 1.5mm X 60° serrtion.
3. Mounting: adaptor mounting to fit DIN, ISO, BS, ASA B5.9 type A spindles.
Specification :
| SPEC Model | Through -Hole (mm) | Plunger Stroke (mm) | Jaw Stroke (In Dia.) (mm) | Max. Pull Force (kgf) | Max. Gripping Force (kgf) | Max. Operating Pressure (kgf / cm2) | Max. Speed (r.p.m.) | Weight (kg) | Moment Of Inertia I (kg?m2 ) | Matching Cylinder | Matching Hard Jaw | Matching Soft Jaw | Gripping O.D. Range (mm) |
| NIT-206 | Ø45 | 12 | 5.5 | 2243 | 5812 | 28.5 | 4500 | 13.7 | 0.058 | M1246 | HJ06 | HC06 | Ø15-Ø169 |
| NIT-208 | Ø52 | 16 | 7.4 | 3558 | 9075 | 26.5 | 3600 | 24 | 0.177 | M1552 | HJ08 | HC08 | Ø20-Ø210 |
| NIT-210 | Ø75 | 19 | 8.8 | 4385 | 11319 | 27.5 | 3200 | 36 | 0.324 | M1875 | HJ10 | HC10 | Ø25-Ø254 |
| NIT-212 | Ø91 | 23 | 10.6 | 5812 | 14990 | 27.5 | 2700 | 58.5 | 0.763 | M2091 | HJ12 | HC12 | Ø30-Ø304 |
| NIT-215 | Ø117.5 | 23 | 10.6 | 7240 | 18355 | 23.5 | 1900 | 114 | 2.331 | M2511 | HJ15 | HC15 | Ø50-Ø381 |
| NIT-218 | Ø117.5 | 23 | 10.6 | 7240 | 18355 | 23.5 | 1500 | 140 | 3.798 | M2511 | HJ15 | HC15 | Ø50-Ø450 |
| NIT-224 | Ø205 | 26 | 12 | 9177 | 23861 | 26.5 | 1000 | 284 | 15.2 | ML3320 | HJ24-1 | HC24-1 | Ø150-Ø610 |
Related Prodcuts
-
Power Chuck
-
Vertical And Horizontal Stationary Power Chuck
-
3 Jaw Wedge Type Extra Large Through Hole Power Chucks (With Adaptors)
-
2-jaw Through-hole Power Chuck
-
Large Wedge Type Non Through-hole Power Chuck
-
Non Through-hole Power Chuck For Vertical Lathe
-
2-jaw and 4-jaw wedge type Non Through-hole Power Chuck (adapter excluded)
