Chih Hung Machinery Co., Ltd.
Test Machines, Plastic Test Machines.
Detail Information
Description :
1.It's suitable for static test of polymer material like plastic/PVC, etc.
2.Humanized operation
3.Temperature controlling system: Adopt P.I.D. controller with high accuracy & multi-function coordinating various protecting system to 4.secure temperature controlling stability & accuracy.
5.Drilled hot plate type circuit design secures even spread of temperature, temperature accuracy at ± 2°C and its surface is hard chrome plated.
6.Heating type: Oil heating type. Max. temperature used: 250°C.
7.Cooling type: Water cooling type, selection of time -> 1 min – 99 min.
8.Low pressure pre-heating mode: Selection of low pressure pre-heating time ->1s – 999s. Selection of exhaust -> ON/OFF
9.Pressurizing type: Oil pressure type, high / low pressure design, automatically compensating pressure.
10.Controlling system: PLC control
Automatic operation: Set temperature-> Stand by -> Push "AUTO" -> Up -> Mould close -> Low pressure pre-heating -> Low pressure timing -> Time is up -> Mould open -> Down -> Exhaust -> Up -> Mould close -> High pressure timing -> Retain pressure -> Time is up -> Water cooling (automatically close the heating system) -> Timing -> Retain pressure -> Time is up -> Mould open -> Down -> Alarm -> Automatic operation completed
Specification :
Model | CTP-8-OHC |
Max. load | 50tons |
Hot plate | 350mm (W) x 350mm (L) x 60mm (T) ( Drilled hot plate) |
Number of layer of hot press | 1 layer |
Cylinder travel | 200mm |
| Pressure | Max. 175kg/cm |
Voltage | 220V/380V x 60Hz / 50Hz x 3phase |
Power | 22KW |
Size of machine | 1700mm (L) x 700mm (W) x 1500mm (H) |
Chih Hung Machinery Co., Ltd.
- Taiwan