Description :

*Optimal Wind Maximum Power Point Tracking
*Wind & Solar Charge Controller
*Can be paralleled (Max. 16 sets) at will; according to your demand.
*Battery charge management; state of charge infromation.
*Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full; Amp-hours; Watt-hours; and 90days of energy-harvest history is stored in the wind charger.
*Continuous output Power Rating without de-rating at up to 50°C ambient temperature.
*Supports Flooded Lead Acid (FLA); GEL; and Absorbed Glass Mat (AGM) batteries; 2/3/4 Stage charging with adjustable set point.
*Input acceptance up to 220VAC or 240VDC normal (240VDC Max).
*Built-in temperature compensation function for safe and complete charging.

Specification :

MODEL	PM-WCC-100AM-1248
ELECTRICAL
Input Voltage Range (no damage)	0 ~ 220 VAC
Operating Input Voltage Range from PMG   (Permanent Magnet Generator)	20 ~ 220 VAC 0 ~ 600 Hz
	Optimal Range: 20 ~ 180 VAC
System voltage ratings	12; 24; 36; 48 VDC
Current ratings-Battery Charge Control	100A
Max. Current in the Brake Resistor	100A Diversion load
DC Input Voltage Range	16 ~ 240 VDC Operating
	240 VDC Maximum
Automatic Brake Function	5 Level: 200; 210; 220; 230; 240 VDC (Adjustable) Can be customized for the wind turbines
Maximum Wind Turbine Capacity
Charging 48 VDC Batteries	6.0KW
Charging 36 VDC Batteries	4.5KW
Charging 24 VDC Batteries	3.0KW
Charging 12 VDC Batteries	1.5KW
Charge Regulation Modes	Bulk; Absorption; Float; Auto/ Manual Equalization
Battery Temperature Compensation	5.0 mV per °C ; per 2 volt cell
DC to DC Conversion Capability	12V Battery: 16~240VDC
	24V Battery: 32~240VDC
	36V Battery: 48~240VDC
	48V Battery: 64~240VDC
Display Status	Built-in 2-line; 20-character LCD with backlight LCD status screen displays input voltage and current; output voltage and current; charge-mode; Battery SOC
Data Logging	Logs energy harvested for 90 days; LCD displays WH; KWH; AH
Energy Monitor	LCD shows SOC; AH; WH; and present charge or discharge current. A 50mV/ 500Amp shunt is required to use
Auxiliary Relays	Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps; 50VDC
Operation Temperature	Full Power Output to +50 °C ambient
Standby Power	< 2 Watts
Relative Humidity	0 ~ 100% condensing
MECHANICAL
Dimensions (mm) [H x W x L]	401 x 258 x 183
Weight	8.3 kg
Optional Diversion Load
Specifications subject to change without notice

• 
  Auto Transfer Switch
• 
  DC/DC Power Converter
• 
  DC And DC Converters