Description :

The TD-610 produces quality thin sheets for spring rolls and pastry ranging 0.35 to 1mm in thickness. Batter is poured into the hopper and then sprayed out from a wide-flat-mouthed nozzle mounted below the baking drum. When the drum surface temperature reaches 120 to 140℃, the batter is sprayed onto the rotating drum to be heated. When the baking drum rotates by 210~230°, the batter is well cooked and turns pastry sheet to be air-cooled on a lengthy conveyor table with electric fans. At the end of the conveyor stands an auto slitting machine which cuts the run-on sheet into the desired length. After-cut pastry stacks are ready for packaging or to be further applied for spring roll production.

Specification :

Dimensions of the machine: length 6600mm x width 850mm x height 1600mm
The width of the skin can be made up to 50-340mm

The machine including-
1. Electronic heating system: 15KW 
2. Mix - starch supplier 1/4HP, non- segment speed change 　　 
3. SSR auto temperature control, temperature error:±1℃ 　 　 　  
4. Ice water cool down, prevent the nozzle of supplying mix starch from block 1HP　　　
5. Main machine drive system 1/4HP non-segment speed change
6. Thermal cover with oven roller
7. Nozzle of supplying mix starch: 180°mm and 230°mm
8. Heat-resisting wire can prevent heat up to 480℃
9. Totally Power :15KW
10. Capacity:1300hr

• 
  Cup Cake Filling Machine
• 
  Dough Slicer Cutting Machine