Description :

1. Internal fuse types or fuseless types available upon request.
2. Low dissipation factor, low temperature rise, long service life.
3. Stable capacitance with little variaion due to temperature.
4. Impregnated with high insulation strength and non-PCB biodegradable fluid in vacuum tank.
5. Internal fuse capacitor mainly has more safety, higher reliability, less installation space, lower installation and maintenance costs.

Specification :

1. Standards: in accordance with IEC 60871 and CNS 1372,3739, JIS C 4902
2. Ambient temperature: -25℃ ~ +55 ℃.
3. Capacitance tolerance: -5% to +15%.
4. Maximum permissible voltage: 110% of rated voltage.
5. Maximum permissible current: 135% of rated current.
6. Dissipation factor: less than 0.05% or 0.5W / kVAR
7. Discharge characteristics: With built-in discharge resistor, residual voltage drops to lower than 50V after capacitor is disconnencted from power for 5 minutes.
8. Sealing : no oil leaking after heating at 80℃ for 4 hours.
9. Temperature rise: below 25℃ at ambient  temperature 35 ℃.
10. Application: It is used for power-factor correction, voltage regulation, and power filter circuits.
11. Usable altitude: Max above sea level 1000M.
12. Frequency: 50Hz / 60Hz

• 
  Capacitors For UV Curing
• 
  High Voltage Power Capacitors
• 
  Capacitors For Low Frequency Furnaces
• 
  Power Electronic Capacitors
• 
  Low Voltage Power Capacitors
• 
  Capacitors For Surge Absorption
• 
  Capacitors For Power Electronics (DC-Link)
• 
  Low Voltage Capacitors

More