Description :

1. 2.54/3.96mm center mass terminated connector housing.
2. 2 to 2c circuits.
3. With or without locking ramp and polarizing rib.
4. Nylon [UL 94V-0] or [UL 94-2].
5. Mates with 0.45-inch (1.14mm) pins.
6. Through and end type.
7. Terminal retention to housing 8lbs [3.63kg] minimum.

Specification :

1. Current rating: 7A, AC/DC.

2. Voltage rating: 250VAC maximum.

3. Temperature range: -40 to +105 degrees Celsius.

4. Contact resistance: initial value/10m ohms maximum after environmental testing/20m ohms maximum.

5. Insulation resistance: 1000M ohms minimum.

6. Withstand voltage: 1500VAC/minute.

7. Applicable wire: AWG #18 to #26.

• 
  Connector Housings